I am an old man over 85 and I am getting confused, help me?

Car needs a doctor this is like 85 old man. Big list thing to fix, Coolant, thermostat, water pump, radiator, crankshaft sensor, cam sensor.

adjust cable or bleed hydraulics
problem can also be caused from dirty oil or incorrect oil in the transmission/ clutch pack

Sadly your car is very old. But the good news is scap yards keep so man parts off any type of old cars .. Check with a mechanic first for the problem first make sure what it is !! and then if it needs changing call around. Could be a wire problem to the fuse could be anything check it out first.

Is the engine Running? If the engine isn't running then it isn't a problem as you are trying to turn the engine over with the rear wheel, and you would need he Worlds Strongest Man to turn that over on his own. If the engine is running then you have a big problem and need to get it to a mechanics before riding it.

Even in my reloading book if you load over max with an H4350 on a 85 gr. bullet you only get 3235. If you drop to a 70 gr. bullet you can get 3457.

The three most common causes (IMHO) of your problem are: 1.) Carb (dirty or gunked up) 2.) Gas (old, maybe has water in it, or wrong octane/type. ie., no e-85 in mower) 3.) Spark plug (worn may need replacement, or gap checked) Lawn mowers are simple internal combustion engines. Like any other, all they need is spark, air/fuel, and compression to run. Think about those three things as you trouble-shoot. I hope this helps.

To retrofit you need to change the condenser, drier, expansion valve and compressor. Generally these units take around 800 grams. Your best way to check is while charging, set the ac on low fan and feel the suction pipe(thick one) where it returns to the engine compartment. It will be cool, charge until it feels cold. That will be enough gas. You can get away with removing the old oil on the compressor, flushing it with 141b and refilling with same amount of polyolester oil.

well read the insturctions of the game and ask ur frends it will help

me too

replace the cpu fan .this normally solves the hanging issue.but if still doesnot solve its time for the minor repairs on ur motherboard.rate this solution as "fixya" if u feel its helped u get ur solution.thanks 4 using fixya n feel free 4 any further assistance