What does ,CO code means?

Was the battery power lost to the radio?

Here are 2 web site error code locators, either one may help:
http://www.selfix-uk.co.uk/search-keyword.php


http://www.ukwhitegoods.co.uk/help/fault-codes/220-laundry-fault-codes?type=rss&limitstart=0

Good luck!

Hey Robert, thank you for your post!
Based off the information you have provided your Electrolux dishwasher is displaying an error code of "CO" and you would like to clear it out. The error code "CO" means that there is a miscommunication within your dishwasher. The best way to clear the code out is to perform a reset and you can do that by disconnecting the power cord for at least ten minutes. If the code continues to display this could mean that your keypad, a wiring harness, or control panel may need to be replaced and I would recommend having a professional technician out. They would have the appropriate tools needed to disassemble your dishwasher and test each component. This will help protect you from any unnecessary part purchases. -Matt

http://service.hoover.co.uk/manuals/OPH714D_1.pdf


user manual

http://www.whitegoodshelp.co.uk/hoover-error-8/

here is a description of the common error your machine has
and how too solve it

hope it helps you...

A CO error code indicates no communication between the display and the board. Unplug the wiring harness and reinsert. Hope this helps.

i think it means circuit open.

look in owner manual

It's only the final steady number that is the reading. When you push TEST it will show 888 and beep annoyingly a few spaced times and then it will display a number between 100 and 400 (around 200 ,,, I had 217) that is just the detector testing to see if it can display numbers. These are NOT CO levels. Then it goes back to 888 and finally displays a steady number. If it's 0 then you're clear. All o f this from the owners manual.

Does the co alarm sound and display show 210? This means you have 210ppm co. This is not good. Are both the gas and co alarms goig off? Try resetting but if it's working properly you've got a pronlem. Check this link for further info: http://www.kiddeus.com/utcfs/ws-384/Assets/900-0113.pdf

Hi,

I contacted the technical team at www.baumatic.co.uk and here is the reply I got.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected]
Sent: 25 January 2008 13:02
To: Taline Bedrossian
Subject: Re: BWE40 wine cooler

Good Morning.
Thank you for your e-mail.
This error code means that your appliance has experienced a defrost sensor
fault. Please contact our service team on 01189 336 911 to arrange a
suitable time for an Engineer to visit you.
Kind Regards

Quality and Technical Department
Baumatic Ltd
www.baumatic.co.uk

You can download the manual from this link

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Laundry/HB00503_WF840_860_865_19504206802_jan05.pdf

You will need to contact the service helpline for the explanantion of the F10 display