Hi all I have philips pwr 2006/37 complete home

Just click the below link. Select the model no of your plasma tv and complete step by step process. It will adjust your fault online.

http://www.samsung.com/us/support/televisions-home-theater/tvs

Is your Panasonic set to monitor the HDMI input? Just like selecting a mode input on the Tv you must also select the mode input on the surround system.
Bill

A VGA cable is for video only. It connects to your computer.

hi,lg lh d6230a home theater player display show the dvd error but not opening cd room .why this wrong please help me.send me reply

1. The easiest solution would be to connect a stereo RCA (red and white) cable to the audio output on the back of your TV.
2. Then connect the other end to the input on your home theater system.
3. Change the home theater system to the correct input.

Good luck!

i have purchased philips dvd and philips home theater 5.1 3300w model. how to connet to the home theater to dvd and tv. because i miss my home theater manual book.

hi
i have also same problem, by that time i am pressing tv/ disc button then it should be okay

Hi,
You need to connect your TV to the AUX connection in the back of your HT system. Then set your HT system on AUX 1 and wait about 5 seconds for the TV sound to come through. If it does not work on AUX 1, you may have to try on AUX 2 or AUX 3 settings on your HT system. Make sure the A/V cable you use is good and in working order and is a good quality cable.
Hope that helps, Gary

Both remotes are operating on the same frequency - usually you would think that having two products of same manufacturer would be a good idea, but in this case, the remotes interfere with each other.

have you enabled the external audio on the TV?