My omnitech shredder does not turn on

Question translated to English.
Question moved from Computers to Shredders.

https://www.getthatpart.com/PAPER-SHREDDERS/SHREDDER-ACCESSORIES-PARTS/

https://www.google.com/search?q=omnitech+shredder+parts

..

Unplug it, open it up and clear the jam, reassemble and give it a try, and try not to shred too many pages at once and make sure that you empty the lower part so it doesn't pick up already shredded material and jam up again.

check the warranty period and if within that period take it back for warranty repair or a new one

get it repaird by the pep u bought it of

This may be of help, this is a bit outside my experience:

Tale of the Dead Staples Omnitech Shredder Why Not Fix it Yourself

Good luck-

It should tell you in the manual but i'm guessing it's that it'll not want thick card, dvds or ties in the shredder

Isn't that the one that FatWallet.com was saying Staples was selling for $20 with free shipping?
Omnitech 10 Sheet Cross Cut Shredder 19 99

Anyway, If you look on the UL label, there should be a phone number to call. (If yours doesn't have it, call 800-675-4481.)

Someone on Amazon had one where the green light came on, but nothing happened. The tech told him the sensor had to be reinitialized. Told him to turn it off, put in a thick paper (birthday card thickness) and turn it back on. He wrote that it worked and runs fine now. (But he still is not happy with it.)

I don't have that model but have an 8 page cheapo shredder. It takes CDs, credit cards and staples with no whining.

In the middle of feed opening there is a sensor which in your case will be stuck. Try clear it using tweezers. Failing that soak the blockage up excessively with WD-40 as it will loosen and soften stuck paper leave it for 10-15 minutes, repeat 2-3 times. Then power on the unit and it should be good as new! Good luck