Netgear WN802T pressing reset buton has no effect

The RESET button is for resetting the wireless section of the router and does not effect the Internet connection.
It looks like the wireless access is faulty especially when you cannot reset and configure the wireless settings.
Try powering off the Netgear for 10 mins the connect the power again.
If you still cannot RESET the Netgear then it is faulty and you need a new wireless router.

just hold the reset button in with a paper clip for 30 seconds or more when you first power it on.

simple a small hole at back panel of router.....just press it with some pen like thin stuff...till the light blinks and its done!

Try RESETTING the router.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Hi there!

Take a paper clip, and insert it into the little reset hole in the back of the router... hold for at least 20 seconds.

username and password: the defaults are admin and password..

Hope this helps

levibit

throw it away and buy a good one :-)

reset the router and use the default user/password (check documentation)

Check with your browser if the router has been reset. If not your unit must be replaced.