Locked out Enter password

Reset Lock Screen Password or PIN on Your Fire Tablet

1. From the lock screen on your Fire tablet, enter the wrong password or PIN five times.
2. Choose Reset Your PIN from the on-screen notification.
3. Enter your Amazon account password, then tap Continue.
4. Enter a new PIN or Password, then tap Finish.

Reset Lock Screen Password or PIN on Your Fire Tablet

Which LG TV do you have? For the LG TV that I have, you need to know the current password to change it or return it to the default.

For my unit, click the Menu button on the remote. Go to Settings and click Enter. Navigate to Lock and click enter. Then select Set Password and click enter again. The default (initial) password is 0000 . Click Enter again to save the password. To enable or disable the Lock, select System Lock from the Lock sub-menu. You will need to enter the password to unlock the TV.

I hope this helps. (My tv is a recent Smart TV 3D units.) Please add a comment with your model and I'll try to check if there are other steps you can try. My TV remembers the password even when unplugged since it has solid state memory.

Cindy Wells

Set up blocking schemes to block specific channels, ratings, and external viewing sources.

A password is required to gain access to this menu.

Setting up Your Password

For USA

LOCK Move Enter

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

For Canada

LOCK Move Enter

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Close

Enter Password

* * * *

Select LOCK.

1MENU

ENTER

Input the password.

2 Enter the password as requested.

The TV is set up with the initial password
"0-0-0-0".

Hope this helps

John

Hi,

The default password on this TV is 9 9 9 9.

To get to the screen to enter this and deactivate parental control do the following;

1) Turn on your TV and press the "Menu" button.

2) Use the arrow keys on your remote control to navigate to the "Parental" header, then press the "Enter" button

3) Enter "9999" at the password prompt. That will lift the password lock.

Thanks for using FixYa.

The Pantech phone was formerly sold by Cingular, but it is now sold by AT&T. Because it is a flip phone, the Pantech does not have a keypad lock. It does, however, have a feature to lock the device and prevent unwanted phone calls being made by other people. Locking and unlocking the phone requires you to know your password.

1. ep 1 If the main screen reads "Phone Locked," choose "Unlock" from the lower left-hand portion of the screen. Enter your password and select OK. Entering the wrong password three times will display "ENTER PUK." You will need to call customer service to resolve the issue.
   
2. Step 2 To lock the phone, choose "Menu" from the main screen. Select "Settings" and then scroll down and select "Security." Choose "Phone Lock" and press the left or right arrow on your directional pad. Press "OK" and enter your password.
   
3. Step 3 Change your password by selecting "Menu" from the main screen. Go to "Settings," then "Security," and then "Change Password." If you have not yet set a password, the default is 1234. Enter either your password or the default and press "OK." Enter your new password, press "OK," and then verify the password by re-entering it.
   

The Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. From Idle mode, touch Menu ➔ Settings ➔ Phone settings.
2. Touch Security.

Lock Phone
When the Lock Phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password
each time the phone is switched on.
To change the phone password, refer to the next section.
Once you enter the correct password, you can use the phone until you switch it off.
1. Touch On or Off from the Lock phone field.

Change Phone Password
The Change password feature allows you to change your current phone password to a new one. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are asked to confirm it by entering it again.
1. Touch the Change phone password field.
2. Enter the current password and touch Confirm..
3. Enter a new password in the New password field and touch Confirm..
4. Enter the new password again and touch Confirm.
The password changed confirmation displays.

Note: If you change your password, be sure to write it down and keep it in a safe place. If you forget your password, your phone requires
service to have it unlocked.

for geret pasword

01 Press Function
02 Press Down button until menu “Change password” displayed -> ENTER
03 " Current password " : Press this Number "726276642" -> Enter 
04 “New password” 
05 0000 ENTER 
06 EXIT 
07 Press DIAL LOCK KEY 
08 0000 ENTER 
09 UNLOCK SUCCESS

1 Function >>> “Change password” ENTER
2 Display " Current password "
3 726276642 Enter
4 “New password”
5 0000 ENTER
6 EXIT
7 Press DAIK LOCK KEY
8 0000 ENTER
9 UNLOCK SCUSSE

01 Press Function
02 Press Down button until menu "Change password" displayed -> ENTER
03 " Current password " : Press this Number "726276642" -> Enter
04 "New password"
05 0000 ENTER
06 EXIT
07 Press DIAL LOCK KEY
08 0000 ENTER
09 UNLOCK SUCCESS