Wedgewood stove manual

If it works leave it, but really all work on Gas appliances should be done by a registered gas technician.

the way to check this is to first see if ignitor comes on or put an amp clamp meter on it. the ignitor needs to draw 2.8 amps or more to engage the gas valve. if it doesnt lite or draw any amps at all. check voltage to bake ignitor. it will be the ignitor most likely. but the gas valve or control could be bad.

you may have a bad ignitor if unit doesnt have a standing pilot.....there may be a lever that needs flipped on the regulator. the regulator valve is where the gas line hooks to on the stove

Hi.


Please contact the seller below to order the part:

Vintage Wedgewood Stove Parts



Regards.

Try these steps first:

Turn off the power to the appliance and let it sit for at least 30 minutes. Turn the power back on and see if the ignitors work. If not, and if all of them are out, it sounds like you may have a bad ignitor board or possibly a loose connection. Typically, the top of the stove has to be removed to access this board, but check you manual first if you have one.

Your glowbar ignitor for the bake burner is bad.
Use the attached diagram to show location.

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5221257

Hi There is a company that have all the reprint manuals and parts for you stove, if you visit this site maybe you could email them or find it online there http://www.antiquegasstoves.com/
Im sure a manual is available
or here a second option http://www.lloydsappliances.com/rheem.html

yes, i get all my wedgewood parts from this company at 310 397 2110.

maybe this might help you?
http://answers.yahoo.com/question/index?qid=20061130165913AAMHKsW