Diagram for defy laundramaid electrologic 920

If your Defy Electrologic washing machine is filling and releasing water at the same time, it is likely that the drain hose is clogged or the drain pump is defective. Check the drain hose for any clogs or debris and ensure it is clean. If the drain hose is clear, the problem could be a defective drain pump. In this case, the pump will need to be replaced.

ck here....

https://www.manua.ls/defy/laundromaid-electrologic-1300/manual?p=13

It;s sensing that the lid is open. Possibly a bad lid switch.

CALL YOUR LOCAL REPAIR SERVICE

Search using Google.com for wiring diagram


Defy Laundromaid Electrologic 1300 wiring diagram Google Search

Something caught between inner & outer bowl. Nail or screw caught in inner bowl. Main bearing seized, replace seal & bearing(s).

My Defy electrologic 720 goes into washing mode ,but not filling up with water.

I had the same problem: E9 error when switching the machine on. This indicates something is wrong with the pressure switch. (or connection to the pressure switch). When you open the top cover at the back of the machine it will be in the right hand corner (when looking from the back of the machine). This is a round device with a clear tube coming in at its bottom and a three wire connecting plug at its side. When unplugging I found one of the pins corroded (green tarnish). After cleaning it off with some steel wool the problem became intermittent - indicating the connection is not too sound. Just bending the pin slightly did the trick causing it to soundly make contact inside the plug. Problem solved!!

What does LE and OL means.

my laundromaid electro logic 920 is making unususl noise when rinsing!!
[email protected]

perhaps you have stumbled onto the defy feature? Classic problem.