Hello i need help lol

If you suffer from region code troubles, you can download a region free DVD player software tool on your pc and then you can play discs of any regions you want. You can try Leawo Blu-ray Player which is a free Blu-ray player and a region free player.

please wait sir

Hi,

Could you please give me the brand and model of your unit so I can further assist you. Thank you.

1.Make sure no Disc in tray
2.Press " HOME " on Remote
3.Press Number keys " 1389310 "
4.Power off then Back On

Now try a non-Region Disc

Alright, just follow these steps and let me know if you have any problems or questions

1. Power and switch on the Durabrand DVD player.
2. Open the DVD disc tray tray or lid.
3. Press Stop.
4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control
6. Press OK.
7. Close the disc tray and press Standby on the DVD player front

For Multi Zone NEC DVD Players....Region Hack....

1.Make sure there is no Disc in the unit when you turn it on.

2.Press pause on the remote.

3.Press 3,1,4,1,5 and then 9 on the remote.

4.Press the number for the required region.(0 = all)

5.Press pause.

6.Turn the unit off then back on and you're good to go.

i fund this by dargan and it worked for me "Def" Camino Real 3, Panama:
Region code hack posted by dargan, August 23 2008:
Same hack for DVD283 worked for DVD-277

<clipped from other post>
Region code hack posted by mhardial, January 25 2008:
DVD Regional Codes
Code Location
**1** USA (incl. territories), Canada
2 Europe (Germany), Japan, South Africa
3 Southeast Asia
4 Latin America, Australia, New Zealand
5 Russia, rest of Asia and Africa
6 China
0, 255, 9 MULTI REGION


Region Code Change


NOTE: Make sure you DO NOT have a disk in the tray while performing the region code procedure

DVD Players


New DVD283
1. Open DVD Tray
2. Press the “Menu” button
3. Press 8888
4. Press the “Display” button
5. Region Code Number shows up. Use the numeric keypad to select your region code number (0 – 6).
6. Press the “Setup” button to exit.

Try this may be work
Multi-Region:
Put DVD into player - wait for regional code violation screen to appear
Once this has occurred press the M (Memory) button on your remote
Press 1 for Title 1 and Play on the remote - this will over-ride the regional code violation detection menu
You can watch the movie by pressing Fwd on remote and change chapters by using the T (Title/Chapter) button on the remote)
or

Switch On DVD player without disc in machine
Press Enter
Press 8, 4, 2, 6 and 9
Press Enter
Player should turn itself Off. If not switch it Off
Switch player back On

0 DVD Hack hits, Showing 0 to 0 DVD Hacks
sorry