At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Won't work with K-Cup in....nothing happens, take it...
You need to remove the holder for the K-cup, clean the holder and using a sewing needle clean out the punch that puts the hole in the k-cup. It gets clogged sometimes.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you checked to make sure the cup is working and all you have to do is pull out the dispenser,add water,if it siphons the water from the cup then you might have a bad water valve,you can try to start the washer just on cold water,if it fills slowly and you can hear the water trickling in the valve is bad,now you have to see if it's the washer valve or house valve,shut off the house water supply,remove the hoses you can put a mark on one of the hoses and on the washer so you don't mix them up when you put them back on,now stick the hoses in a bucket and turn the water on,if it comes out strong you know it's the washer valve that's bad.so check the cup all it does is fill up and after it fills so much, the fluid goes up the tube in the cup and out into the other cup,if it does that then most likely the water isn't getting into the cup to do this.you can go here to see how it works,hope this helps you out and your dispenser might be different from this one but they all work the same way https://www.youtube.com/watch?v=Ucp7EFbtZLk
just make sure the water passes through the tube in the cup
cycle is, fill cycle for 1 minute first. If there is not water entering the unit when first turned on, look for that issue. Water turned off, water valve not working or some restriction, clogged water filters, etc. That is got to happen first. Don't over look the bin stat being bad. Nothing happens if teh bin stat is bad. It sends voltage to the control board that runs the unit.
This used to happen all the time when I had one. The best thing to do is to completely uninstall the printer and all it's added programs from your computer.
Switch off the computer and let cool down (have a cup of coffee) Now reboot the computer and then reinstall the printer and follow instructions to connect via Wi Fi
If this works make sure auto update is switched OFF as every time mine was updated your problem occurred. So much for Degreed wonders who try to justify their existence and completely mess up a perfectly sound working system when they don't know what they are doing, shame they never seem to have a brain or any logic.
Obviously a redtriction michael. They work like the old perculators . See if you can sccess and make sure the tubing is seated snd that the water is heating. Good Luck Michael
×