Phone wont connect to devices

Hi,
To get this device paired to your phone, you need to turn on the device and then turn on the bluetooth of your phone. search for available bluetooth devices in the phone, you can find the device with its name in the phone search box. tap on the device name and now you have successfully connected your bluetooth device to your phone.

turn on the bluetooth device and then turn on the bluetooth connection in your phone and select search device to connect your bluetooth device in your phone.after you search the device you are now connected and you can now play music through your bluetooth.

Follow the following steps:

1. Turn ON your Bluetooth Headset device. (A light may lit upon turning it on)
2. Turn On your mobile phone's Bluetooth.
3. On your Bluetooth menu of your phone, select "Search for devices"
4. When finish searching, your Bluetooth headset must be on the list. Else, repeat searching until your phone can find it.
5. If you can find it, tap Connect.
6. Now, test your connectivity by playing some music.

i dont have acess to one of those computers but i will try my best to help you out.
click start, control panel,devices.then see if you find the bluetooth device.
turn on the blue tooth on the phone and use the discoverable function.
use the computer to search and try to connect to the phone.
when it is connected to each other the you can now transfer info.
to send the pics no:-
mark the photos on the phone
select send via bluetooth
search devices
select the computer from the phone
send it
on the computer recieve file and choose save location.

Alternative method:-
some bluetooth devices allow you to search the phone and take any device after connecting to it!!

HOPE THIS HELPED A LITTLE!

The bluetooth connectivity is bad my dear.dont even worry yourself.this days phones can disappoint.

Make Sure you turned on the your bluetooth...And Have your phone search for the devices..If it still wont recgonize it take to your dealer and they can fix it

The name of your bluetooth headset is the OmniTech (OT-020C).

This will be slightly difficult to explain without knowing the model of phone... First off, you need to ensure that you are using a bluetooth enabled phone. You will need to enter the settings and tools menu. From within that menu, you need to find either "connections" or "bluetooth" and select. Make sure bluetooth is enabled. There will be an option to add a new device.

On your bluetooth headset, hold down the power button down until the power light stays lit. This may take 5 seconds or more. Now your bluetooth is in pairing mode.

Back to the phone, you want to hit "add new device". On certain models of phone you additionally have to select "search for devices". Your phone will recognize any headsets in pairing mode. When it is finished scanning, allow the phone to add your headset. It will ask you for the device pin code. This pin code will be 0000.

I hope this answered all of your concerns. If you are having trouble with finding the correct settings from within your phone, reply with your phone model and I can give you more detailed information!

To turn the bluetooth function on
From Standby select: menu, settings, bluetooth, turn on

to pair a device to your cell phone

menu, settings, connectivity tab, bluetooth, my devices, new device to search for availably devices.

make sure the device you are going to use is in pairing mode.

enter the passcode if required: new devices are always 0000.

These are all located on page 50 of your manual.

Goto:

spanner - wheel click!

bluetooth -wheel click!

bluetooth disabled - wheel click!

Enable bluetooth -wheel click!

Paired devices
*EMPTY*
- wheel click!

Add device - wheel click!

after the search select the device you wish to connect to...& contiue to follow the on screen prompts & pairing instructions.

Just because your phones Bluetooth option is turned to on doesn't mean it's searching. I would try going in to your device history and clicking on new device while your Bluetooth is in pairing mode.