I moved from one condo to another. At my former condo I had the Toshiba 37HL67 37 in. LCD HDTV attached to a wall mount. I left the wall mount at the old condo. I want to use the pedestal assembly but cannot find the screws/bolt for the assembly. Please help. Thanks in advance, gene johnson [email protected] 360 904-9413 July 19, 2013 at 5 PM pdt
SOURCE: What must I do to attach a Wall Mount to my Toshiba 20HLV16 LCD Chassis?
Attach a wall mount, to back of a 32" sharp, LCD flat panel
SOURCE: what size bolt do i
Metric M5 or M6 from HD or LOWES for about 35 cents each.
Get different length to try.
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://s807.photobucket.com/home/budm/allalbums
SOURCE: how do I install the pedestal stand for the
the stand just slots into the bottom of the tv and you just tighten it with four bolts provided.
SOURCE: What size bolts attach tv to stand for Toshiba 37"
You will use the bolts that you take out to remove the base from the tv.
1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.
Note:
Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
2) Remove the jack pack cover on the back of the TV to expose the pedestal stand screws. The jack pack cover can be removed without tools.
3) Remove the five screws shown in the diagram below. This will allow removal of the pedestal stand.
4) Once you have removed all five screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand a way from the TV (Remorve 5, 4mm or 5/32" Allen Bolts from back of TV.)
For Mordels
26HL67
32HL67
32HL67U
37HL67 = My TV
42HL67
Herb
55 views
Usually answered in minutes!
×