I have an icoustic tabt02 dock and it had - Radio Communications

my first gen 80 gb zune will not turn on and it doesn't seem to be charging what should i do?

Pairing with iPhone

1. Connect the iPhone Dual Dock or iPhone Bluetooth Travel Cable to a USB 2.0 port on your computer (not on the keyboard).
2. Connect iPhone and the headset to the dock or cable. The headset pairs with iPhone automatically.

Pairing iPhone Bluetooth Headset with another Bluetooth-enabled deviceTo pair the iPhone Bluetooth Headset with another wireless device, such as a Bluetooth-enabled phone or computer.
Step 1: Set the headset to be discoverable

1. Turn off the headset.
2. Press and hold the headset button for about eight seconds, until you hear the startup tone and then five quick high beeps.
   
   The headset is now discoverable and will remain so for about five minutes. The status light blinks while the headset is discoverable.

Step 2: Turn on Bluetooth on the other device and search for devices

1. On the device, turn Bluetooth on and set the device to search for other Bluetooth devices.
2. On the device, choose iPhone Bluetooth Headset and enter the PIN code 0000.

See the instructions that came with your other Bluetooth-enabled device for more information about pairing it with Bluetooth devices.

When your iPhone is plugged into the dock be sure that your volume is turned on loud and also that the dock is on. if your iPhone is plugged into the dock but the dock isn't on your iPhone is not going to ring out loud.

Ok I have this figured out, if it's the A-101a dock, with the power turned off, double click the MEM/SET button, that will get you there! Choose from format first (24/12 hour time) then click again for hours and minutes. Took me ages, just figured it out!

ipod touch has a light piece of plastic on bottom where it connects to the dock youtube has a video on how to remove it softly with a razor blade and once it is removed it will work properly although to be played through stereo i must have my ipod touch 4th gen on airplane mode

replace the usb connector then tried to hooked up to the other usb port.

The most cost effective bet is to fit a charge upgrade or a Bluetooth and charge upgrade yourself. It takes about five minutes. The complete kit is available form invebo.com and you don't need any special skills. click here to see the instruction video

Hi,
Do you still have this light??
My sons just broke and he can't sleep without it but they don't sell them anymore :(
Willing to buy it off you if you still have it?/
Let me know

Thanks
Mel
[email protected]

Well first turn your phone's bluetooth ON Then turn ON your headset.Wait for the indicator light to turn from red to blue. (if it doesn't turn off your headset then turn it back on) Press and hold the Call Control button until the indicator light flashes red and blue. (meaning it's starting to pair) Set your phone to find/add bluetooth device and select your headset from the list found When pairing is successful the indicator light should turn blue and your phone will confirm the pairing.

hope that helps....