I need detailed instructions on how to replace heating element of a Maytag DE410 electric dryer including diagrams...Dryer does not heat...

Dryer Diagnostic - Not Heating up - Repair ... - YouTube

? 11:16
https://www.youtube.com/watch?v=3Vns05qIjGs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Repair your trusty Maytag Electric Dryer suffering from some of the ... However, in REGULAR mode, it runs normal too, but theheat stops ...

Maytag Dryer Not Heating - How to Test the Heater and ...

? 4:12
https://www.youtube.com/watch?v=_zjiZ0sbCgI
Oct 12, 2013 - Uploaded by Bill Newberry
How to test the heating element on a Maytag Dryer. If you Maytagdryer is running but not heating these are what you need to check. ... The dryer runs but does not heat. .... Not heating Maytag electric dryer - Duration: 19:38.

Not heating Maytag electric dryer - YouTube

The heating element connects to a thermal fuse and then to a thermostat. The thermal fuse may be blown. There is no outward sign of failure http://www.appliancepartspros.com/01-blower-heater-parts-for-maytag-mde9700ayw.html
14 and 15 on the diagram

How to Replace Your Electric Dryer's Heating Element

www.davesrepair.com/DIYhelp/DIYreplacingWPLdryels.htm

How to Replace Your Whirlpool, Kenmore, Roper, or Kitchenaid Electric Dryer's Heating Element. Here's a common job that many folks are afraid of, but it's ...

Whirlpool / Kenmore Dryer Heater and Thermostat Test ...

? 7:40
https://www.youtube.com/watch?v=KZY9CQ_CqvY
Sep 13, 2010 - Uploaded by Bill Newberry
Basic checks for a Whirlpool made dryer. ... Whirlpool & KenmoreDryer Repair - How To Diagnose No Heat ...

Whirlpool - Kenmore - Maytag Dryer Not Heating Repair ...

? 2:42
https://www.youtube.com/watch?v=i95okOr2rOI
Mar 1, 2011 - Uploaded by ApplianceAdvice
It will explain step by step instructions on how to test the thermostats, fuses, and heating element inside the ...

How To Fix Dryer With No Heat ' Dryer Repair - PartSelect

There should be an element behind the spin drum,take cover off the back to undo drum.

Hi,

Make sure front of dryer is not blocked, air flow is needed to dry.Check that the lint filter and exhaust duct is clean.

Check the blown fuses and home’s circuit breaker tripped. Dryer use 2 household Fuses or a circuit breakers, If one is blown, the dryer may still operate but not heat. Alternatively, the dryer may heat, but it may not heat up as hot as it should. Replace the Fuses or reset the circuit breaker.

Another common cause of a dryer failing to heat is a faulty Heating Element. You will need to replace it.
Good Luck and have a nice day. Rating the solution is highly appreciated.

You should get a diagram of your dryer *(look on the exterior back panel and under the top lid to see if they put a sticker diagram there.

Your heating element can be shorted open so no heat can be made.

You can easily check the element with continuity meter to see if it's broken. Then, check the part number from the Maytag website and price up a replacement. I would also check Ebay if the unti is older and you want to save some money on the part.

Good luck and be careful...always do your continuity checks with unit unplugged.

Have someone check to be sure you have 240 volts to the plug. The dryer will run on 120 volts but must have 240 volts to the heating unit. If you 240 volts you probably need a heating element or control.

First answer is yes; high resistance is good. I am not sure I understand the second question. The reasion one has to isolate the element is to avoid resistance from other parts. This, I believe , is the most likly problem. 

check all of those "relays", htey are thermostats, monitoring you temps, they should all have continuity through them if not its bad. (temp jump it out) just to see the element glow. TEMPORARIly.. you CANNOT leave any jumped out you will damaged something. HOUSE FIRE. just wanted to instill the importance of not leaving jumped out

Hi NoNicky. I do not own a Maytag, but did find information about it on a couple of sites I've used before for my Kenmore. I'll include an image that should be for your model (they list MDE7500AYQ and MDE7500AYW). There are also details on the steps needed to gain access to the dryer and a diagram of the heating subsystem. Kenneth P.