Will not install

In order to resolve the matter at first, you have to know more about the error code in detail. it will help you to troubleshoot the error easily. These type of Windows Update Error 0x80070422 is fairly common error among firewall related issues as it indicates the inability of the operating system to start up the update service. The problem with this error is it oocurs all of sudden, without showing any symptom.

Easy hacks To Tackle Error 0x80070422
Solution 1: Reset Windows Store
Solution 2: Disable Proxy Connection
Solution 3: Re-register Windows Store App

Alternative Solution

A virus or malware can cause this error. So, you can install any reliable antivirus and run a scan to fix the problem.

Hope the entire above step will help users to fix Activation Error code 0xc0004f074.

I went online and found the HP8600 user manual and this is their solution to the error code 363 that you reported, which I copied off their site. Hope this works for you:

• Turn Error Correction Mode (ECM) off, if you encounter the same error repeatedly. Click this link HP All-in-One and Fax Products for more information on enabling or disabling ECM.
  

  
  

  NOTE: Error codes that apply specifically to ECM have ECM listed next to them.
  

  
  

Error Code: 356, 357, 358, 359, 360, 361, 362 ECM, 363 ECM, 364 ECM, 365 ECM, 366 ECM

Definitions

• The remote user pressed the Stop key, causing the session to be terminated.
• The remote machine encountered a system problem such as no paper or a paper jam. This prevented the fax from receiving any more pages, and caused it to terminate the session prematurely.
• The call-waiting service can cause this error. The click, heard for an incoming call, is actually a momentary disconnect of the line.
• The remote machine encountered an incompatible feature causing it to terminate the session.

Solutions

• Configure the remote machine for document reception by clearing any paper jams, loading sufficient paper, and clearing any other error messages.
• Configure the local fax machine to use a slower reception speed.
• Enable or disable the ECM setting.

If you are getting the error at startup, roxio service might not started or disabled. What you can try to do is to enable all roxio service. refer to the steps below.
- click start > run - type services.msc - look for all roxio service i.e roxwatch.db - double click it then select the startup type to automatic - save the changes then restart computer

Cheers . . .

Install pc suite or ovi suite first before plugging in any device this will help you

RPC is yet another service that you need to enable so that printing will take place.

Usually, when I encountered this printing error while printing a networked printer, I do the following steps (in Win XP):

1. Open the Control Panel
2. Open Administrative Tools => Services
3. Disable the following services in order: (a) Print Spooler (b) Remote Procedure Call (RPC) (c) Remote Procedure Call (RPC) Locator and (d) Server.
4. Minimize all open windows
5. Refresh the PC/Laptop by pressing F5
6. Enable the same services in item 3 in the same order
7. Refresh PC again
8. Print.

If the same error re-occurs, restart your computer.

Best would be to determine whether any changes was made to the system prior to the error starting. Changes would include Windows updates, driver installations, hardware installations or software installations and upgrades. If you are unable to determine this, then boot into Safe Mode and view the System and Application Logs. Stop any services which may report that it can't start or has some or other error. If Software upgrades has been done, do a roll back on these and remove any newly installed hardware. If no upgrades where done hardware or software wise then disable all devices which is not required to boot the system and disable all services and applications loading on startup which is not required to boot the system. If the system boots after this then enable each program and devices separately ( Re-booting the computer after each one is enabled ), until the system fails. Disable the last device enabled before system failure and continue the process until finished leaving the devices / programs which causes system failure disabled.

plz format operating system again & try to re-install it or see in bios whether audio is disable, if it is disable then enable it

Just enter in avg website & download avg 8.0 for free again & then uninstall the antivirus software u have & reinstall it.

go to start
than run
type in msconfig
and disable all services and starts
press ok
reboot
install ur vga driver
when it says u need to reboot prior vga driver than dont
go again in msconfig
enable all what u have disabled and press ok than reboot
when ur system start the vga driver is loaded in the services and wil work properly

if this wil not work than there is a program in the background that u wont let the vga driver install

than u go again in the msconfig and there u disable one by one the servicers and starts
that means disable the hook in the tab press ok and reboot and try to install the vga driver
its a long process but so u will find the software thats blocking ur install