My remote of dvd player is lost can i have new one

Please try the following procedure: start the player without any disk on it, open the disk tray, leave this way and at your remote control press 9 9 9 9 0 , you should see region 0 displayed, then close the disk tray, your player should be now region free.

Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__5r4e

The short answer is NO it will not play Divx. It will only play DVD, DVD-R/RW, DVD+R/RW, VCD, SVCD, CD, CD-R/RW, or MP3-CD.
I hope this helps and good luck!

Did you follow these instructions exactly? If you pressed 9990, as you mentioned, it will not work. You need to press 99990. Do you see region "0" on the display?

start the player without any DVD in it.
open the lid.
while the lid is open press 9,9,9,9,0
you should see region 0 displayed.
close the lid.

Your DVD player is now region free.

note:
replace 0 with 1 to 6 at to set the wanted region number if needed.

Cinetec (whoever they are hehe) remotes will work the Durabrand

MWD7006

First please read this:
http://en.wikipedia.org/wiki/DVD_region_code
And this should also help.
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-us%3AIE-SearchBox&rlz=1I7GWYA&q=Philips+DVP320+Region+Codes&btnG=Search
Some places charge rental stuff but a service manual will tell you how to do this and could cost somtimes around $20.00 less or more.
I hope this helped you a little.
Kevin

I guess, the easiest way to go is to get an universal remote control and try codes from the provided list until you run into a working one. Many universal remotes have a mode when you can try to click tens or hundreds time on a button (like UP button) until it accepts the code.

Is $12 too much for a brand new remote with battery included? http://cgi.ebay.com/Cyberhome-CH-DVD-300S-DVD-Remote-Control-New_W0QQitemZ190145031182QQihZ009QQcategoryZ15077QQssPageNameZWDVWQQrdZ1QQcmdZViewItem ZT3000 "Beta tester of "0"s and "1's"

Your DVD player can be hacked by following the attached guide so that it will play any region. http://www.videohelp.com/dvdhacks/philips-dvp-320/3522