Where is the the resume button for mp 280 pixma

Method One: Using Mptool Software to reset Canon MP Printer

1. Turn of printer then run mptool software this software automatically detect the printer.
2. Click reset main and reset platen button in the waste ink counter section.
3. If you want to reset the cartridge ink level, click reset black and reset color in the ink counter section.

Method Two: Reset manual Canon Pixma MP Printers

1. Turn off the Printers.
2. Press and Hold the button Resume/Cancel then press POWER button.
3. Release the Resume/Cancel button while keeping POWER button on press.
4. Press Resume/Cancel 2 times and then release all the buttons.
5. When the indicator recorded GREEN - click Resume/Cancel 4 times!
6. Turn off and On the Canon Pixma MP Printers. And your done.

Warning: Getting rid of the error message won't change that you might end up with ink leaking out of the printer if you don't either replace or clean the ink wastepad.

Goto www.canon.com and download from support.

Fixing "Error code 6c10? in your Canon MP 620 printer is easy. For this you need to turn your printer off. After this you can press and hold the 'Resume' Button. While pressing the 'Resume' button, you can turn off your Canon MP 620 printer. The green led of your printer should go on as you are holding the Power button; release the Resume Button. Now after that you need to click on the 'Resume' button twice and release both buttons without releasing the Power Button. Now you click 'Resume' four times then click 'Power' button to confirm the selected action. Finally you must turn your printer back on.

If you encounter "Error Code 5B00" it means that the Printer Counter Protection is Full and it required a reset and Ink absorber replacement, if you want your printer to work again. There are two ways to reset the Canon MP printer, One is by using a Software tool and the other is manually resetting the EEPROM of the printer. Below is the step by step procedure on how to reset your Canon printer.

1. Using MPtool Software to reset Canon MP Printer
Turn of printer then run mptool software this software automatically detect the printer.
Click reset main and reset platen button in the waste ink counter section.
If you want to reset the cartridge ink level, click reset black and reset color in the ink counter section.

2. Manual Reset of the printer
Turn off the Printers.
Press and Hold the button Resume/Cancel then press POWER button.
Release the Resume/Cancel button while keeping POWER button on press.
Press Resume/Cancel 2 times and then release all the buttons.
When the indicator recorded GREEN - click Resume/Cancel 4 times!
Turn off and On the Canon Pixma MP Printers. And your done.

Reset Waste Ink Counter Canon Pixma MP210 and Canon Pixma MP220

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led should be on
3. hold the Power button, release Resume Button.
4. Without releasing the Power Button, double click "Resume" button and then release Both Buttons.
5. Click "Resume" for four times then click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

to reset kindly folow this steps,

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Hope this helps. Please rate my response.
Thanks.
Have a good day.

try this...........

Turn off the printer

Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

Hold the Power Button, release the Resume Button.

Not releasing the Power Button, double click “Resume” and release Both Buttons.

Click “Resume” for Four times

Once you click “Power”, to confirm the selected action (reset eeprom). To disable the printer “Power” button to click again.

..its instruction how to reset a canon pixma 145

E27 = Waste ink absorber full or platen waste ink absorber full
Reset Your printer.
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Turn off the printer ( "Power" button).
Hold the button "Resume" (red circle in the triangle), add a printer (click "Power") - an indicator light green.
Hold the "Power" button, release the button "Resume".
Not releasing the "Power" button, double click "Resume" and release both buttons.
Four times click "Resume"
Once you click "Power", to confirm the selected action (reset counter absorber). To disable the printer "Power" button to click again.