Ge monogram cooktop grill glo bar ignitor - GE Monogram ZGU48N4GHSS / ZGU48L4GHSS Stainless Steel Gas Cooktop

When an "F" and a number appear in the display and the cooktop beeps you have a function error code.
Touch the CONTROL LOCK pad.
Disconnect power to the cooktop and then reconnect.
If an F-code appears again, call for service.

Hi Ishiggs,

The ignition switches probably got wet.

Please follow my below Tip on how to fix it:

GAS STOVE CLICKING PROBLEM...

Kind Regards

JEDEMEYER1

* If this solution helped you, please accept it

Most likely it's the switch or element that's bad. Unless you wish to call service, start with the switch since it's probably cheapest of the 2.

Sorry to read about your problem, I hope this helps you out.

their is no cleaning of contacts, they are sealed units..have to replace the switch,
you have to remove the entire range from the counter top..will take 2 people

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

If you are saying the clicking continues you must move the burner knob past the LITE position.
If it continues clicking with the knob past the LITE position the ignitor switch behind the knob is bad.

Hi,

Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

Hi, water is a great conductor of electricity. It is likely nothing to be concerned about in this case though, if you light the burners and allow the water to burn off/evaporate from the ignitors it should be fine. It happens all the time with gas ranges and cooktops. Once the ignitors are dry they will stop conducting/sparking unwanted. Hope that helps calm your concern. Thanks for coming to "fixya" for your solution. Please take a second after reading this to rate the info provided to you. Good luck. Macmarkus :)

Hi,

Just because it glows that does not mean it is not bad...
The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating
http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

Oven Problems Replacing the Igniter
http://www.fixya.com/support/r4572625-oven_problems_replacing_igniter

heatman101

We just had that problem - the igniter is electric - if none of the burners are "clicking" it could be a power problem. unplug the stove and check whether the outlet is working. In our case, the outlet the stove is plugged into has a "GFI outlet with a reset button. So we reset the outlet and that fixed the problem.

I would have someone come out. Perhaps a gas plumber first. Gas is not something you want to fool around with yourself.