Our electric was off for several hours today and now my creda c366e oven has fu.14 on the display and i cant set the time??/

Hi John, The link below is a user manual for a creda oven, It says you have to set the time and date before the oven will work, Pages 11 through to 14 will show you how to set the time and date.... CHEERS..
http://www.manualslib.com/manual/723002/Creda-Continental.html?page=1

While holding minute minder and cook period buttons press + or - to set the time after time is set release buttons this should allow for normal operation

Try pressing the "select" button. This should activate the settings menu and use the other two buttons to adjust the time or temperature or anything else tha tappears on the display.

Experiment a little and have patience!

try this site for your manual
kitchen.manualsonline.com/manuals/.../creda/creda_oven_product_list.html

hope this helps

Just fixed my cfes388 after giving up finding another power board or someone to fix it! It got so bad lately that we couldn't use the oven because it would quit after 10 min. and then might take an hour to come back on! Even using just the stovetop would create enough heat to make the display go crazy.
What I found were several cracked solder joints at the connector that the ribbon cable from the display plugs into on the power board. I resoldered three pins that when metered and touched would go open. Used the oven for several hours today with no trouble at all!

You need to determine if you are getting a mains feed to the fan motor, if not, then you need to trace the wires bcck to source and work from there,
If you are getting a 240 volt supply, then the new fan is faulty.
Hope this helps you.

Sometimes you can unplug the unit for at least 30 minutes and reset the unit and it wont do it again.Try that first. An error code on a thermador of 14 means latch switch problems.

sounds simple but look at the knob to see if it is cracked and hence not turning the shaft