Question about RCA 36V430T 36" TV

1 Answer

Repair part unavailable

Our TV started to turn off immediately after turning it on and would continue this cycle. We took it to the repair shop and was told that the MAV board was bad but the part was unavailable and therefore irrepairable. Any advice?

Posted by on

  • 2 more comments 
  • jennapruitt Oct 09, 2008

    The problem is that the TV would turn on and off. The set also appears to have a very high level of static coming from the screen when it is on.

  • Anonymous Oct 12, 2008


  • franciservin Oct 15, 2008

    My tv is in the shop for the third time since July 2007, because it has never been fixed. Now they are telling me it cannot be fixed.

  • don_ra2906 Oct 31, 2008

    Identical problem. One morning my set is just fine, that afternoon, I turn it on and it then turns itself off.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The servicr is correct that the MAV board is no longer available, but what is the problem with the set? That board in mostly an input board. Please describe the problem, perhaps we can fix the board.


Posted on Oct 09, 2008

  • ABRsvcs Oct 09, 2008

    With no other symptom, this is likely to be an over-voltage problem inside the set. I'll have to research this one a bit and get back to you. This is repairable without too much expense I think.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My ml320 starts drives then speedo drops but engine ticks over no excelleration turn off then starts again noprobs this can happen 3/4/5 times while driving

my 2003 430 CLK CONVERTIBLE had a similar problem - started fine drove as far as you wanted to drive then wouldn't start again until 3 cycles of engine turn over and sometimes it would start driving 10 miles an hour when you least expect it! In my case, it was a camshaft sensor. There are 2. Only one of mine had failed. While I am handy, I was immediately over my head and took it to my excellent independent Mercedes repair shop. About a $250 repair.

Nov 08, 2016 | Mercedes-Benz Cars & Trucks

1 Answer

Why wont my lg 50 plasma tv turn

Perhaps replace your power cord. Borrow power cord from repair shop. If it works it's the cord. Also if the TV is plugged into power bar make sure the power bar hasn't been inadvertently turned off.

Oct 07, 2015 | LG Televison & Video

1 Answer

Wont turn on

If parts are unavailable because your unit is too old, then all you can do is buy a replacement unit.

Nov 10, 2013 | LG Televison & Video

1 Answer

Magnavox 37MF321D/37. suddenly just shut off and would not turn back on, no blinking green light nothing!

Price the board first and then decide, I fix these in our shop but do not like or enjoy working on them at all.

Dec 20, 2012 | Toymax Magnavox 37MF231D 37 in. LCD TV

1 Answer

Stupid tv!

Sounds power supply board is bad in your TV and most probably replacement of all electrolytic capacitors in power supply board will solve the issue.
Take TV to local TV repair shop for repair.

Aug 30, 2009 | Akai LCT3201TD 32 in. LCD Television

2 Answers

My Amana 20 refrigerator does not cool. It starts

yes, it can be repaired but ir can be expensive.Compressor problem, filter problem, check with a certified technician

Aug 28, 2009 | Refrigerators

2 Answers

I have a lg plasma,and the problem is it comes on for about 1 second then shuts off. repair shop says its the power supply? what do you think?

If the repair shop says it is powerboard it means they already took a look at the TV and you dont need to worry about it.
If you have any doubt please post the sympton here (detailed) and I can tell you for sure what the TV needs.
I need to know what the led does and how it does.

May 16, 2009 | LG 50PC1DRA 50 in. Plasma Television

1 Answer

Turned tv on, heard a pop, no picture, standby light blinks conti

POP goes a fuse in your power supply or maybe even a capacitor you need to have this repaired unplug this immediately. Take it to a local repair shop to have it fixed.

May 03, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Standby/power button blinks with no picture or sound

id take it and have it repaired. people on here can tell you what they think it is but no one knows for sure what is causing the problem. a repair shop can guarantee the repair.

Jan 25, 2009 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Samsung PLH403W Projection TV Lamp Problem

Maybe try removing the dust filter on the back and cleaning it. If I recall correctly the TV won't turn on unless the filter is clean and fully snapped back into position.

Aug 10, 2007 | Samsung PLH403W 40" Rear Projection...

Not finding what you are looking for?
RCA 36V430T 36" TV Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides