20 Most Recent
Whirlpool RMC275PD Microwave Oven - Page 8 Questions & Answers
What does F6 error code for Whirlpool microwave model XCK4640802 mean
The F6 code is listed as a problem with the MW relay. Here are the testing steps from the technical literature. The relay that is mentioned is a part of the control so if the problem continues you will need to replace the control.
1. Unplug microwave oven or disconnect power.
2.Check the cable to Relay 4903.
3. Check to see if the relay (4903 on relay electronic control) contact has welded closed.
4. Replace all parts and panels before operating.
5. Plug in microwave oven or reconnect power.
6. If problem persists, unplug microwave oven or disconnect power.
7. Replace electronic control.
8. Replace all parts and panels before operating.
9. Plug in microwave oven or reconnect power.
Good luck.
Semper Fi,
Z
2/1/2018 1:14:03 AM •
Whirlpool...
•
Answered
on Feb 01, 2018
My whirlpool oven turns itself on and off without me touching it have had this problem before and was told it was in demo mode but don't know how to turn it off
I am not sure this is your issue ... but from the Whirlpool web site .. to turn demo mode off:
Possible Solutions
The control has been placed in demonstration mode
IMPORTANT: This feature is intended for use on the sales floor with 120 V power connection and permits the control features to be demonstrated without the oven turning on. If this feature is activated, the oven will not work.
1. Press SETTINGS/CLOCK until "DEMO MODE" is displayed.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Reset power to the product:
There may be a problem with the User Interface/Keypad, or the associated wiring.
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Monitor the oven for one (1) minute to ensure the error code does not display again.
- Verify oven operation.
1/9/2018 6:41:51 PM •
Whirlpool...
•
Answered
on Jan 09, 2018
Not finding what you are looking for?