20 Most Recent Whirlpool MH1150XMQ Microwave Oven Questions & Answers

I would unplug and get another one.

Whirlpool... | Answered on Sep 17, 2017

Replace it

Whirlpool... | Answered on Mar 09, 2017

This is a very wierd problem that we have been dealing with for years, and never seem to get a correct answer. Have actually seen green slime like oil inside the units before. From what we have heard, is that this oily substance is actually coming out of the blower fan assembly inside the unit. Its like bearing oil from the center support shaft. Will go away over time, but the fan may or may not go bad. Good luck with the mystery oil.

Whirlpool... | Answered on Dec 09, 2015

Look carefully for a button which has small print under it that says something like "Lock - hold 3 sec". Press and hold that key for 3 or more seconds to unlock the keyboard. It's a child-lock feature.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Whirlpool... | Answered on Jan 25, 2015

Same as locking it - press Cancel/Off for 5 seconds until it beeps twice.

Whirlpool... | Answered on Nov 24, 2014

I have to assume that you are referring to the cooktop lamp.
Under the microwave there is one screw to remove to access the lamp. It is a 30 watt candelabra base lamp.
It shows on page 14 of the user manual below. http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%208185379.pdf

Whirlpool... | Answered on Aug 22, 2014

its an error need to call technical assisstance ..thAT error ranges for faulty temp sensor/probe up to control board ....

Whirlpool... | Answered on Aug 05, 2014

Yes, the door panel comes off easy (3 screws on the side). Mine was cracked so I ordered a new one. Not the vent above it is cracked. Cheap plastic!

Whirlpool... | Answered on May 19, 2014

you have a bad magatron... eather it's short or ground.. out of warranty ? if so drop it off at scrap yard.

Whirlpool... | Answered on Apr 11, 2014

I had the same exact problem. My clips arced when I ran the unit and I also observed flames which was quite unsetteling. A work around for me, since I don't use the rack was I took it out then removed the clips. All that was required to remove the clips was a pair of plyers grabing each cliip at their base. I pulled firmly and there is alittle resistance but with a firm pull straight out they'll pop out.

But I have to say if you use rack your probably looking for a new mircowave.

Whirlpool... | Answered on Apr 05, 2014

Got the same problem. Still inquiring but I might have found a solution here : http://midwestapplianceparts.com/microwave-parts-537/whirlpool-microwave-parts-648/microwave-door-panel-663/whirlpool-microwave-door-panel-w-glass-4212.html
$79 for the panel only

Whirlpool... | Answered on Mar 21, 2013

The clear plastic cover is glued on. It can be removed with a heat gun to soften the glue. Then clean with Goof Off or WD40 and alcohol before installing the new one.

Whirlpool... | Answered on Oct 26, 2012

Not finding what you are looking for?
Whirlpool MH1150XMQ Microwave Oven Logo

145 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9156 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Microwave Ovens

  • Whirlpool Microwave Ovens

Most Popular Question

mh1150xm microwave changed cooktop

  • Microwave Ovens