20 Most Recent Whirlpool RMC275PD Microwave Oven - Page 7 Questions & Answers

Try searspartdirect.com. There’s usually owners manuals in parts list.

F8E5 Exhaust air template detection failure 1. Press CANCEL - CANCEL - START, verify failure code, and then press CLOCK/OPTIONS to display the exhaust air temperature sensor reading. Verify the sensor temperature reading is at room temperature (typically 50?F to 90? [10?C to 32?C]) and verify failure code. If failure code matches complaint, continue to Step 2. 2. Unplug microwave oven or disconnect power. 3. Disconnect sensor from ACU PCBA. 4. Measure HF NTC resistance between connector pins and confirm reading is between 9.5k??and 10.5k??at room temperature. If measurement is not correct, or if a short or open circuit is found, replace sensor. 5. Replace all parts and panels before operating. 6. Plug in microwave oven or reconnect power. 7. If the sensor temperature reading is still not correct, replace ACU PCBA. 8. If failure does not appear, stop.

It's broke

Usual failures of a microwave are the diode, the high voltage capacitor and lastly, the magnetron itself. These are all HIGH voltage components. You really need to be careful when working on them.

Whirlpool maintains a library of free downloadable literature for nearly all of their products. Your MH7140XFZ microwave oven is no exception. The site contains owner's manuals, installation manuals and parts lists. Your answer will be found in one of the two installation manuals. You should review both to determine which best applies for your particular installation.

Referring to manufacturer's literature is always the best source for information - so I did not want to paraphrase anything in it - especially since it is readily and freely available.

I hope this helps & good luck! Please rate my reply - thank you.

Which microwave model do you have? Most of the Whirlpool microwaves that I know only have a 12-hour clock. They do not indicate AM or PM. To set the ones that I know, press Clock. Type in the current time in a 12-hour format. Press Clock again. The only model that I find quickly that has an AM/PM option is the GH7208XR. On that model, start with the main menu displayed on the LCD screen. Touch Settings and Info. Next press Clock. Then press Adjust Time. Follow the instructions to set the time and the AM/PM setting. I'll assume you use the +/- buttons. To hide the clock, get to the Clock Screen. Press Adjust Time and Hide Clock to return to the main menu. See these two pages of the manual for this model: https://www.manualslib.com/manual/190817/Whirlpool-Gh7208xr.html?page=9#manual and https://www.manualslib.com/manual/190817/Whirlpool-Gh7208xr.html?page=12#manual Current Whirlpool over-the-range models sold in the US are listed here: https://www.whirlpool.com/kitchen/cooking/microwaves/over-the-range.html . Other Whirlpool appliance manuals are available from the Owner Support page: https://www.whirlpool.com/services/manuals.html. I hope this helps. Please add a comment with the model number for a more accurate information on setting the clock. The model number should be inside the microwave on the rim. Usually it's on the bottom of the door frame near the door hinge. Cindy Wells

replace magnetron

https://www.manualslib.com/manual/321114/Whirlpool-Jt-369-Sl.html

https://www.bestbuy.com/site/questions/whirlpool-2-1-cu-ft-over-the-range-microwave-with-sensor-cooking-fingerprint-resistant-stainless-steel/5900304http://www.builtinappliancecenter.com/en/catalog/product/442280-Whirlpool-WMH53521HZhttp://media.datatail.com/docs/manual/442280_en.pdf

there are 2 if the door does not sag or tilt the hinges are fine. there are non available for purchase, and what repair parts are available exceed the the value of MW

1.5 cubic feet

http://www.mamondelashes.com/3d-bottom-lashes/3d bottom lashes 3D BOTTOM LASHES MANUFACTURER-MAMONDE LASHES Factory price wholesale china 3d bottom lashes.100%handmade 3d bottom lashes made of mink hair.The china 3d bottom lashes is durable and can reusable.We have many styles and colors or as you request.If you order we will on time delivery and the OEM/ODM is available.We can provide free sample. http://www.mamondelashes.com/3d-bottom-lashes

I would replace unit. they get cheaper ,every year. If the magntron is bad the part is $200.00 plus labor. Whirlpool Microwave GH5176XPS0 Parts List

There is no reset. Depending on age of unit it may be more cost effective to buy an new rather than repair. Microwaves keep falling in price.