Lionel Fastrack O36 Manual Right Hand Switch 612018 "trains power problems" Questions

I have a 1950's engine and transformer. I run it every year a Christmas. Last year the reverse direction switch started working intermittently. I would press it multiple times and occasionally it ...

I have a Lionel ZW transformer older version 1955-1956, And lately my train loses power at one area of the track and then regains power again. This happens on both the outside and inside tracks. This ...

Have power to the track loco cab light turns on red bow lights up but train dosent move at all. No bell or ho ho and nothong on any of the other cars Try new batteries in the controller Be sure they ...

I just built a model railway but my train will not run? If your train is not running you should check the 6 following things: 1. Is the train sitting on the Track?2. Check All Electrical Connections.3

...problems i am unable to have the train move forward or backwards when i turn the power on the train will idle and when i press the direction indicator on the transformer no reaction by the locomotive ...

...power adequate for the train and is it a working tranformer? Will the train run by connecting the wires directly to the two points of the train (wheels and center rail connector)? Are the tracks new? ...

lionel g gauge wont run on track The wheels will turn but not on the track. Arethe batteties too low? I think you have solved the problem. Check all the wheels to be sure that they all turn. The ...

...problems I have a Polar Express "O" gauge set. Locomotive will not move even though I know it is receiving power (front light goes on). Any suggestions. Have you let the loco charge first? The ...

6-30068 The train is only used arount the Christmas tree. This year it seems to have poor power and appears to be loosing contact with the track. Some times it will not go at all. I have tried ...

Led blinks when train put on track Led stays steady until the train is put on track , then it blinks and won't run I am assuming you are using the Lionel CW80 power source. If so, the blinking light ...