...nipples. one in bettween carbs.1 and 2 and the same in between 3 and 4. what gets hooked up to those or what do u do with them? Also there is a second nipple on the pitcock and what gets hooked up to ...
...com/watch?v=tflWI-ieCpA http://www.therevcounter.co.uk/motorbike-articles/34369-motorbike-brakes-beginners-information-bleeding-guide.html Have a look at the above links. They are very good at ...
Question about Bajaj Discover Motorcycles
2004 Harley Davidson FXSTD - FXSTDI Softail Deuce rear brake caliper nipple leaks @ there is rubber nipple on the side of the chrome rear brake caliper it seems to be spitting brake fluid, once in ...
clutch will not bleed I had the same problem...FIX...with these bike you need to bleed the master cylender first. The way to do this is to fill the resevior and but the cap back on,pump the handle ...
vacuum lines 03 suzuki 1500 vacuum hose came off where does it reattacment Check those nipples on the throttle bodies on each side. (2)http://i44.tinypic.com/35d0wsn.jpg
Vacuum line not connected correctly I have a 91 Katana 1100 and need to find a diagram for the vacuum lines off of the carbs and where they have to go. ok fuel fill lines are the 2 lines between carbs
Question about Yamaha Motorcycles
what is the size of the rear brake bleed nipple i need in a 2006 yamaha xt125r? Metric 6 or 8 mm. Hi, Eden that would be 6mm for more information about your question and valuable "FREE" downloads that
I have a 2006 vfr 800 and had to replace clutch lever (came home and bike was on its side in the garage). After replacing the clutch lever I barely have any pressure and when pressed the bike is very ...
16 questions posted
Usually answered in minutes!
34 Questions
7 Questions