Maxtor Hard Drive "jumpers slave" Questions

...slave in another system. I just need to know where the jumpers need to be placed usualy its just one jumper if no jumper on maxtors becomes slave. jumper on 50 is master. if u use cable select.. on ...

Jumpers Serttings on Quantum HD Where are the jumper pins and what are the slave settings. Only jumper I found has ..CS..DS..and SP. Right now the jumper is on the DS pins. Thanks! Nick CS = Cable ...

i need jumper settings for maxtor n256 model 96147h6 i wish to run it as a slave pls help. thx For use as slave there is no jumper connected. (Master on/slave off0 The jumper settings are listed on ...

...On, Slave: Off. I want to rearrange the jumpers on it to change it from a master to a slave so it will work on my newer pc. Thanks. From your own description Slave : Off therefore remove the ...

...hi frined remove your hard disk jumper & u r hard will be slave PLACETHE JUMPER IN THE MASTER AT FIRST POSITION AND REMOVE ALL JUMPERS FROM YOUR SLAVE DRIVE IT WILL BE DETECTED AS SLAVE...

...may be ambiguous, my last one offered the option of Master on / off. (Jumper in position 1 for on, no jumper for off) The off in this case was of course slave. The result being, no jumpers -

What is the jumper pin placement to make a slave of a DiamondMax Plus 9, 80GB hard drive? The manual is linked below and section 3.3.1 covers jumper settings. The slave setting shows the park position

slave by moving the jumpers the the correct pins. You should see 4 sets of pins, for slave you put the jumper over the second set of pins. Your manual is here http://www.seagate.com/staticfiles/maxtor

jumper settings for master drive if its a SATA hard driveyou dont need to set master slave the biggest capacity hard drive will set as master During the boot process you will see on the screen to ...

...slave drive. Follow the guiide written on your drive.' '\ Rate my help please++++Thanks for using FIXYA Jumpers are metal pins that have small black plastic sleeves that slide over the top of them, ...