...80% rule = you never get all DE out when backwashing, 20% stays behind. You Don't want to OVER charge your filter. Good luck. yes, thank ...
de filter pressure too high water is cloudy backwash the filter from main drain until sight glass is clear-this will reduce filter pressure. After backwashing return gate valve to filter position, ...
Question about Hayward Pool & Spa
DE filter that should have been installed with a multiport valve normally used on sand filters. Your pool guy seems to lack sufficient experience to be installing equipment yet. He probably mistook it
how do you backwash to lower water level with the Pinnacle pump? The model of pump doesn't really matter,You backwash the filter by changing the position of the backwash valve (while the pump is off).
...DE filter, add the correct amount of DE to your skimmer return while the pump operates. An 18X34 pool takes about 5-7lbs.) After I backwashed my filter I turned to filter and it is doing a different ...
...filter material (DE type filters) these DE type filters are a no nonsense affordable filter that don't have all the bells and whistles, but do a better job filtering than a paper cartridge type ...
...DE filter you need to backwash then recharge with the correct amount of DE.If you have a cartridge filter you will need to break it down pull the cartridge and hose it down. Check to be sure your ...
...backwashing WHen I place the system to backwash, the water comes out clean. When the pump runs in the filter mode, it releases bugs and dirt which should have been backwashed out. We did replace the ...
Question about Pentair Pool & Spa
Pentair 48 FNS filter, all new grids and top still won't backwash....pool is cloudy....what's the trouble??? When I backwash, the sight bubble stays clear....no dirty water is being pumped out
2 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions