...pool via return line every start up. Checked all troubleshooting causes (tube tears, bad gasket, cracked tube sheets, loose bolts, o-rings, etc. All looks OK to 3 pool specialists. I'm out of ...
Question about Polaris Pool & Spa
...pool return line, and the vertical threaded end (on top) plumbs into the Polaris return line. This is a dedicated return line for pressure side pool cleaners that has been pre-plumbed into the pool ...
...return flow and causing my pool to sometimes create alge Odds are you have an "Aqua Luminator" or "Johnny Light" style light that has replaced your factory style return or discharge on above ground ...
...pool steps. make sure that you are utilizing your return flow. If the return jets are not positioned properly, it will cause issues with steps. Position the return line directional so that you can ...
...to cover the entire surface of the pool. Add return diverters or divert return inlets downward. You may need to use the Pool Pulse feature to lower your flow. You might also need to add hose
...return piping of the pool. If you have a heater it should be connected between the output of the filter to the return piping of the pool. If you have a chlorinator the output of the heater it should ...
...sounds like your valving for the return water is set wrong. check to make sure that some water will return to the spa when the pool is running. It's a valving problem more than it is a filter
9 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
