Husqvarna "Chain Saw - 16" Bar, 3 Hp "chainsaw ignition timing" Questions

Ad

chainsaw Remove the flywheel side cover to expose the flywheel and ignition module. Check the flywheel magnets to ignition module gap with a thin business card for a gauge. If ok, remove the grounding

Ad

Question about Makita Garden

1 Answer

how to ignition time this? The ignition timeing on all modern chainsaws is controlled by the flywheel magnets, the flywheel key, and the core of the ignition unit, so other than checking the key has ...

Ad

Question about Husqvarna Garden

1 Answer

...thne stops no spark chainsaw cuts 10 times thne stops no spark No spark is either a bad ignition coil *(dies when it gets hot) or, if you still have points and condensor, time to replace those

Question about Husqvarna Garden

1 Answer

...CHAINSAW TIMING There is not a method to set timing. The flywheel is keyed for location. The ignition module can be moved slightly but the effect will be minimum. If you are having backfires or think ...

Question about Poulan Garden

1 Answer

No spark from spark plug I have a Poulan pro 4218 that has only a few hours on it. Ran fine yesterday. Today will not start. Checked the spark plug... No spark. Replaced the spark plug... still no ...

...timing space, faulty ignition module, bad sparkplug or the spark plug lead. The running problem is most likely a fueling issue, check the fuel lines, filter and make sure fuel is getting into the ...

chainsaw wont start replaced spark plug cleaned carb Are you getting a spark..? - NO? check wiring loom from ignition module, check timing gap between flywheel and ignition module, check on/off switch

chainsaw that was running great and it just went dead and now it is popping back through the carb what is wrong with it and how do I fix the problem If its back firing through the carb, It would point

Question about Garden

1 Answer

chainsaw will not start. might be flooded. only fairly new. If the saw is flooded, remove the spark plug, switch the ignition off, push the choke in, now crank the engine approx ten times, now leave ...

...chainsaw ms260z will not start Got spark and fuel If fuel is making its way to the cylinder and the plug is wet then check the following 1) For clogged spark arrestor if fitted with one. 2) ...

Not finding what you are looking for?
Husqvarna "Chain Saw - 16" Bar, 3 Hp Logo

581 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...