Husqvarna "Chain Saw - 16" Bar, 3 Hp "idle" Questions

...turning if this is happening, then your chainsaw is just idling to fast, you need to turn down the idle speed a little. on the carby, there are 3 screws, 2 small (H), (L), and a larger screw is the ...

chainsaw blade turns constantly, even when idling. If the chain turns on the bar when the saw is at idle, then the idling speed is still too fast. If you turn the idle screw down until the chain stops

Does not idle My son gave me a McCulloch MS1635 without a users manual. Can you help me with the idle adjustment? Thanks. A link to a MCC 1635 OM follows: ...

adjust idle up on poulan pro 42 cc chain saw I need to adjust idle on my chain saw. It will not idle and needs to be adjusted up. Won't idle when you are not cutting. Adjust the low side out another ...

husky 350 chainsaw idle to high how do I fix the idle,I see the low and high screws First there is an throttle idle screw that adjust the amount of throttle at idle try turning it ccw until it idles ...

Idle adjustment My chain saw won't idle and i need to adjust idle screw up to get it to idle. I am not sure how to do this. First start with the initial settings on both low and high side. They need ...

I have a McCulloch Trim Mac SL+ which will not idle. No matter how I try and adjust the idle screw it cuts out. Which idle screw are you adjusting, the idle jet (L) or the idle speed screw which sets ...

1635AK will not run in high idle The chain saw starts and will run fine on low idle, but when I attempt to run it in high idle it shuts down. I have never been able to use the saw. Have tried to ...

Member Discussion on Husqvarna 240e Chainsaw Idle Adjustment I have a new 240e and cannot keep it running. It will start, after many pulls, and one of two things happens. After running for 30 seconds,

...upon acceleration after starting and idling would like to know the procedure for adjusting the low idle speed and the high operating speed turn the high speed and low speed mixture screws right ...