the belt slips. How do you fix it? The belt slips on what? Can't provide an answer without knowing details of the problem. Provide tool info like brand, model, S/N etc. The more info you provide, the ...
Sanding Belt Slips Badly I have a Ryobi 4x36 Belt/Disc Sander, Model BD4600. Even with a new SANDING belt, it slips or stops as soon as a piece of wood touches it. The yellow gear on the right changes
I have a Ryobi 4x36 Belt Sander (BD4600). I've only used it for a little over a year to sand plastic; nothing else. The sanding belt is not slipping; the drive belt is not slipping. However, now even ...
Belt slipping I have a Ryobi 4x36 Belt/Disc Sander, Model BD4600. Even with a new belt, it slips or stops as soon as a piece of wood touches it. The yellow gear on the right changes the position of ...
Question about Porter Cable Tools & Hardware - Others
Porter Cable 362 belt sander - the paper slips off Porter Cable 362 belt sander - the paper keeps slipping off and adjusting the tension doesn't seem to help - can you advise? there might be a buildup
Question about Ridgid Tools & Hardware - Others
belt sander runs until I put pressure on it I've taken off the cover and my drive belt is intact and doesn't seem stretched out or worn. but when I put pressure on the belt the motor runs fine but the
Question about Fein Tools & Hardware - Others
The rotary speed dial in my Fein MultiMaster slips caused by the vibration when the tool is turned on. Is there a way to tighten it? When I set the rotary dial to the high setting and turn the tool on
HOW DO I REPLACE A TIMING BELT ON A 3" X 18" BELT SANDER On the side of the sander there is a black triangle shaped cover with 3 screws holding it in place. Remove the screws and you will ...
Sander Belt keeps slipping off. My electric belt sander, belt keeps slipping off. What is the solution? what I would do is using compressed air clean the underside as best you can there might be a ...
Question about Porter Cable Tools & Hardware - Others
How do you replace the drive belt on a Porter Cable Belt Sander I have ordered and received a replacement belt for a Porter Cable Model 361 Type 6 belt sander 3X24. What is the trick to get the belt ...
49 questions posted
Usually answered in minutes!
123 Questions
62 Questions
28 Questions