Question about Dell Inspiron Computers & Internet
...0 seek failure on it. pressf1 to continue, f2 to enter setup diskette drive o or disk drive o? f2 to enter bios check boot options to boot on drive o [hdd-0], most boot options go floppy,cd-rom, ...
things that I know to no avail does anyone know a solution? Cecil If you are given the option to go into the setup (F2) try to disable the floppy disk drive or move the hard drive up in the boot order
Question about Dell Inspiron Computers & Internet
...drive. 1. At the start of the computer Press F2 2. Go to the Boot Device Configuration. 3. Enable Hard Disk Boot Priority. 4. Set the First Boot Priority to Hard Disk 5. Save and Exit. Please let me ...
Question about Dell Inspiron Computers & Internet
Drive and I keep getting the same message. help! I think you should press F2 to go to the setup page. There, you should change the order of your boot device. set the first boot device to hard disk set
Question about Dell Inspiron Computers & Internet
disk drive 0 seek failure. hit f1to continue then blue screen with stop: 0X0000007E (0XC0000005, 0X83AF9630, 0X8A6BC7B4, 0X8A6BC4B0) appears. Any help? Your computer is not able to boot from your hard
Question about Dell Inspiron Computers & Internet
...drive. I have tried to remove it, but every time I reboot, it shows back up. The system has never had a floppy, I don't have any jump drives, mp3 players, etc; hooked up, just a printer. Hi, the ...
Question about Dell Inspiron Computers & Internet
...drive, putting in the Dell VISTA reinstallation disk (that came with the PC), but this isn't being read either At this point, I am almost out of ideas. Is there something I've overlooked? If not, ...
...disk or drive is damaged, or if your trying to boot your computer and you have a floppy in the drive that is not bootable. It will try and boot from floppy first then cd then hard drive usually but ...
Question about Dell Inspiron Computers & Internet
...disk drive is defective or maybe the IDE cable is deffective, or maybe the cable on the floppy drive is not properly inserted , try to replace IDE cable of the floppy drive if still the symptoms ...
...(A drive ), there could be a flopy disk already in the drive that the machine is trying to boot from...if you can get to the setup screen, the menu option "use last known good configuration" may
640 questions posted
Usually answered in minutes!
1,822 Questions
1,740 Questions
1,432 Questions
1,351 Questions
971 Questions