...is a switch in the jack that disconnects the battery from the circuit. This might be your problem and it would be the first thing to check if there is no apparent power to the preamp. Hope this
...preamp output) is not making contact. These jacks are really poor and the problem is not that uncommon. Fix is to open the unit and increase the spring tension on the contact or replace the jack. ...
...preamp to check for obviously loose wires, but nothing. Is there anything else I'm missing? I've tried to look for a replacement, but apparently these preamps don't exist. Any help would be ...
...Check the battery in the preamp. Also adjust the eq to see if you might be clipping the frequency you are generating. ALSO do not overdrive a tuner... they get confused and won't register. I had one ...
check battery in your guitar. The battery in the guitar is enabled when a cable is plugged in and MANY forget to unplug the cable from the guitar and have a dead battery within a day and blame the amp
...is not working no reverb some one said I need new preamp tubes first change tube 12at if not help check the tank reberb (one spring is broken) Check out the springs and see if any is broken or ...
...preamp but, that sounds like a power supply problem, considering, the tuner is the part of the circuit that would need power. Volume and tone controls don't, unless they are active,(which I've never ...
...preamp- check if there is a battery for the preamp. These preamp are basically op- amps with the impedance corrected for the input pick coils and a balanced output. So a loss of signal here can be ...
Question about The Music
...preamp section: Check the power supply: Make sure that the preamp section is receiving power. Check the power supply components and ensure that they are functioning correctly. Check the signal path: ...
30 questions posted
Usually answered in minutes!
130 Questions
42 Questions
20 Questions
18 Questions