...tube assembly use dummy print heads to do the priming (new ink tubes are empty & they have to fill with ink).. Action: Remove all cartridges and print heads, switch on the printer follow the ...
...remove cap 1 than using a small flat screwdriver disassemble printhead (engagement points 2 and 3) Warning - a printhead is filled with 8 ml ink After disassembly - clean the printhead with fluid ...
Question about HP DesignJet Office Equipment & Supplies
...tube *** to remove the air from tube or blokage it comes with unit when u purchage, pls install them one for each colour then machine performs the test & then u install the new printhead & ...
...Remove the old Ink Tube System (refer to pages 8-53 of the Service Manual). NOTE: If removal and installation instructions are needed for reference during any repairs performed, refer to the HP ...
Question about HP DesignJet Office Equipment & Supplies
...tube can come loose and cause the type of problem I am experiencing with the Brother. Thanks, ken The short answer to "how to remove print head" is there is no easy way. I don't have the service ...
Question about HP DesignJet Office Equipment & Supplies
...some cases, check your printer purge unit.. see if the tube is not disconnected as if the tube came off..there won't be any pressure to clean your print head .. it's bit technical to fix it
Question about HP DesignJet Office Equipment & Supplies
...remove the needle from the syringe and fit the tube into the tip till its firm. 2. Pull 10 ml of isopropryl alcohol inside the syringe (note: no vacuum or air should remain inside the syringe) 3. Fit ...
...print head rests is a small plastic suction tube. This tube can become disconnected and will prevent the printer from printing. Check to see if this is your problem. In the picture the red circle ...
...print more text documents). If that doesn't work, you'll have to find a way to check the purge unit/capping assembly under the home position of the head. It will require taking the unit apart and ...
Question about Epson Office Equipment & Supplies
...you removed the yellow strip of the cartridges. remove the upper unit and check when head cleaning the ink goes throw the ink tube. if not you can sure that the head cleaning unit is to be
182 questions posted
Usually answered in minutes!
125 Questions
147 Questions
140 Questions
87 Questions
92 Questions