Question about Frigidaire Washing Machines
...power cord open door remove spring from door seal and peel seal away from panel remove the two screws that hold the door lock inplace reach inside move the switch so you can access the 3 electrical ...
Question about Washing Machines
door lock light stays on Washer does not operate Let the power be on. Look at the right end side of control panel:end of cycle, keep this button de-pressed for 3 secs. Your prob is solved. Pl click if
Question about Crosley Washing Machines
...Door switch/lock unit failure. 1. Unplug washer or disconnect power. 2. Check door switch/lock unit. 3. Check the wire harness connections to the door switch/lock unit and Central Control Unit
Question about Electrolux Washing Machines
...has locked the door so I can't open it unless I unplug it (and choose to face the water in the drum). How bad does it sound? How do I fix this? the power surge might have ruined the relay or ...
Question about Washing Machines
...power! Maytag ,Whirlpool Washer Diagnostic - Breaker tripped and ... ? 7:00 https://www.youtube.com/watch?v=dx2vCzO8828 Jun 13, 2013 - Uploaded by ApplianceVideo.com Yeah, keep it ... Maytag ...
...switch, the light will turn on with [DL} or [DU] but if you touch hole any button for 3second to diagnostic all the lght will go off no power at all, is that could be a door lock switch?please ...
...says'check Lid/ door' - The lid/ door is closed as normal. tried a power cycle. starts working for 10 seconds and stops with error code and beep. please advice asap! Replace door/lid
Question about AEG Washing Machines
power supply, but the door remains locked for 1 to 2 minutes (PTC cooling time). Certain models feature a pilot lamp which lights to indicate that the door is locked. This pilot lamp switches off when
...door for a little if you stopped it during the spin cycle. The problem is what they call the WAX switch or heater. When power is applied to this WAX lock it takes 30 to 60 sec. to lock and to unlock ...
...door is locked, start/pause light flashing after it trys to run cycle every 4 minutes. i have unplugged, turned power off, held on/off button in for few seconds, tried to keep turning it on every 4 ...
63 questions posted
Usually answered in minutes!
74 Questions
35 Questions
16 Questions
17 Questions
9 Questions