1999 Toyota Camry "install new iac valve" Questions

Ad

NEW one from a local parts shop only costs $180! Also, should she replace the vacuum line at the same time? The EGR valve gave her quite a problem a few years ago until it was finally replaced AND the

Ad

...new battery installed yesterday but the problem continues, except for the horn situation. Check engine light functions normally (comes on at start then goes off). She's 500 miles away from me! Any ...

Ad

Question about Toyota Camry

2 Answers

...new welsh plugs also we tried to reset the idle however don't think that has worked. Now when I start the car in the morning it vibrates a lot and when I try to accelerate it holds back, it ...

...new O-ring with clean engine oil and install on IAC valve. CAUTION: If IAC valve replacement is necessary, use only a valve with the appropriate pintle shape and diameter. Dimension A must not be ...

...install it using a new one Clean the IAC valve mounting surface on the throttle body of old gasket material. Using a new gasket, position the IAC valve on the throttle body. Install and tighten the ...

...Discard the gasket. To install: Install a new gasket and position the IAC valve. Torque the retaining bolts to 8 ft. lbs. (11 Nm). Attach the electrical connector. Reconnect the battery ground

...harness (with one way diode inside of the harness) to prevent backfeeding for the IAC valve and a new IAC valve also gets installed. That's where I would look. IAC valve or "idle air control"

Question about Toyota Camry

1 Answer

...new gasket, position the IAC valve on the throttle body. Install and tighten the retaining screws to 71–106 inch lbs. (8–12 Nm). Attach the wiring harness connector to the IAC ...

Question about Toyota Camry

1 Answer

bolts and remove the IAC solenoid and gasket from the throttle body. Installation is the reverse of the removal procedure. Use a new gasket and tighten the retaining bolts to 71-97 inch lbs. (8-11 Nm)

...new O-ring, install the IAC valve and tighten the retaining screws to 18 inch lbs. (2 Nm). Attach the electrical connector. Connect the negative battery cable. The PCM will reset the IAC valve the ...

Not finding what you are looking for?
1999 Toyota Camry Logo

1,612 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1994 Toyota Camry
1994 Toyota Camry

1,753 Questions

1998 Toyota Camry
1998 Toyota Camry

1,565 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1996 Toyota Camry
1996 Toyota Camry

1,134 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...