1987 Toyota Celica "clutch cyclinder" Questions

need to replace hydraulic clutch... how? bolted on outside of trans, look under lower radiator hose, bolted down by 2 bolts to remove clutch slave cyclinder

...cyclinder, and it will start and run but when I come to a stop it dies out on me. What could be the problem with this? I have changed the fuel filter.. Please check the: - Ignition system ( Ignition ...

...clutch slave cyclinder in my 93 honda accord, and there is no pressure when I press on the clutch. The clutch peddle will not return to the normal position. I have fluid in the line and in the ...

...no pressure on clutch pedal changed master cyclinder and slave cyclinder. But there is no pressure when we pumped the clutch. The pedal did not go to original position. bleed the air out of the ...

...are adding is what you are looking for. i believe there are only three places it could leak... the master cyclinder for the clutch... the hose or the hydrualic cyclinder at the clutch itself. ...

...cyclinder is shot unless the slave cyclinder is out look for fluid on firewall by master cyclinder if dry check by clutch under car plus slave cyclinder needs to be bleed when new fluid is put ...

clutch,slave cyclinder,and clutch master cyclinder, still having problems with the clutch pedal being low, i bleeded the clutch several time but it won't come up any higher, any suggesstions. I assume

...Clutch Changed the master cyclinder and the slave cyclinder and we are trying to bleed the clutch but there is no bleed screw on this year model truck. We have used the method suggested by our local ...

...cyclinder no sign of wear before clutch went out.resivor was empty,refilled and now fluid won't pump down(no air bubbles).need help on removing and installing new master cyclinder.hopefullly solving ...

...clutch disk. Bled the slave cyclinder. Still sticks. I'm thinking the clutch slave cylinder may be bad. Cannot find a leak at upper end in hoses or Clutch master cylinder. However when first had ...