2004 Hyundai Elantra "evap" Questions

...Hyundai, engine hard starting after fill up hard starting after gas fill up Most likely is a bad EVAP purge valve. But check below list.This indicates that a part of the EVAP control system is no ...

P0441 DTC P0441 - Evaporative Emission Control System Incorrect Purge Flow What does that mean? This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system

CODE P0441 This indicates that a part of the EVAP control system is no longer functioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines , ...

EVAP PO446 Hyundai Elentra 1997 Hi there, P0446 - Evaporative Emmission Control System Vent Control Circuit The Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP ...

...all the hoses are good. Sometimes goes away for a week sometimes a few hours,any ideas? P0455 - Evaporative Emission Control System Leak Detected (no purge flow or large leak) This indicates a ...

...check engine light is on. Had it diagnosed on inspection computer. 2 codes came up . An evap leak was code 1. And code 2 was a gross evap leak no flow. Had a smoke test done and techs ...

...as good as the OEM one. See here for more details and other potential causes: P0133 The also is an evap sensor.That can cause a Check Engine light.Over filling your tank will cause the media in your ...

P0449 OBD2 code meaning for 2004 Hyundai Elantra? EVAP purge/vent solenoid circuit condition. the PCM has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in ...

Check fuel filler cap problems - for Evap Emiss leaks Fuel cap do wear out,from constant coming off to going on,a replacement will ensure a evap code on the check engine light will not appear

code p0440 CODE PO440 EVAPORATIVE EMISSION EVAP SYSTEM MALFUNCTION. POSSIBLE CAUSES CHECK ALL EVAP HOSE CONNECTIONS,FAULTY EVAP CANISTER PURGE VALVE.