2004 Honda Accord "piston froze" Questions

453 detroit went to start motor ro0lled over then froze up pulled starter cant wrench eather almost no play its stuck like chuck broke a piston or piston is full of water or off timing

the piston should go back into the caliper, if not, then it sounds like the piston has froze. when this happens, there are times a person has to replace the caliper, if piston can not be pushed inward

...piston back in if that wont work then they may be froze up and need replaced but i don't think so being its a 2003 also you can open the bleeder screw but you will need to bleed the brakes once there ...

i can't close the piston on caliper ,tried clamp, releasing pressure. There was A hole in the line,we replaced the line. sorry caliper is froze either rebuild or replace thnx

...truck goes right not steer whole truck replace the right brake caliper if the steering pulls to the right. The caliper piston has froze up inside causing the right brake to drag causing your ...

...and try turning the engine with a wrench/rachet both ways. Check the timing belt, if broken the pistons will come up and hit the valves then stop everything from turning. Is one of the pullies ...

...froze up. Caliper problem, can I push the car back and forth to get it unstuck? Because of the way callipers are designed 'rocking it' will have no effect. That was more of a method for rear Drum ...

...they will not just sqeeze in if you are having a tremendous amount of difficulty getting the pistons back in i recommend replacing them. I too had the same problem the caliper froze up on

froze. It moved a couple times then would freeze again. what could be wrong with it? Handbrake mechanism, brake caliper or brake piston could be partially siezed or possibly rear wheel bearing siezed.

piston caliper on a nissan 300zx? there is 2 ways, one way you keep the old pad on and use a clamp to push it in and some calipers you have to buy a tool at the part store and you screw the pistons in