2003 Honda Accord "time change outer tie rod" Questions

Ad

...outer tie rods 2014 Honda accord V6 touring Auto shake at speeds over 80kph, wonders all ways correcting steering wheel hear a rattle when going over bumps from front end, have had the tires balanced ...

Ad

...time and patience to replace. Reverse for installation. Pop new shaft into transmission (you can usually do this by hand with a good push. Re-insert into hub and leave loose. re-attach any suspension ...

Ad

...change the tire rod first take the outer tierod off of the spindle tthen take the boot loose from the rack and try to break the inner tie rod loose make sure when replacing the inner tierod that you ...

...change front end on 94 gran marquis Front end is a pretty vague description of what you are trying to do. There are - shocks -lower ball joints -upper ball joints -inner tie rod ends -outer tie rod ...

...outer tie rod. Went to get car lined up, they told me my inner tie rod needed replaced. Only got alignment. Stopped at another car shop after alignment n they told me my boots were leaking n I needed ...

Question about Honda Accord

1 Answer

...outer tie rods. The noise continued so we changed the rotors. Now, the noise is not as loud but like a tum tum tum noise only when turning what can it be. We can't continue to put money in this truck ...

Question about Honda Accord

1 Answer

...outer tie rod end (you can do it without the tool, but it does make it harder). Other then that, it's pretty much straight nut & bolt work (undo, reattach). It's not really a weirdness job, it is ...

time the BJ's are being changed they are probably going to be riveted in and you will have to grind or drill them out. I recommend grinding the rivets with a 4" grinder, much faster. (a 9" grinder won

...time. Then I would need a wheel alignment, Is minimal sway enough to change the rods? Interesting. First of all, I have never heard of such a thing being included on safety inspection. It almost ...

time parts may have been changed, the new parts may or may not of had grease fittings. Grease fittings for steering could be found on lower ball joints and outer tie rod ends if they had been replaced

Not finding what you are looking for?
2003 Honda Accord Logo

1,150 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...