2006 Chrysler Town & Country "turn signal flasher" Questions

...turn signal flasher located? where is the turn signal flasher? My signals works sometimes, sometimes not. Sometimes speed up, sometimes normal. 4 way flashers works fine. I read somethign about Turn ...

...turn signal flasher is worn out. The turn signals have their own flasher. It is usually on the drivers side of the vehicle under the dashboard. It is normally a cylinder about 1 inch in diameter and ...

...TURN SIGNAL QUIT WORKING IS THERE A FLASHER MY TURN SIGNALS QUIT WORKING IS THERE A FLASHER THAT CAN BE REPLACED AND WE CAN'T FIND A FUSE BOX FOR THE SIGNALS INSIDE THE CAR THERE IS ONLY 1 FUSE BOX ...

Turn signals don't work all the time but they do sometimes. My hazard signals work fine. Try swapping flashers if they're the same & see what it does. Hazard flasher & signal flasher.

...turn signal relay located replaced combo switch in steering wheel worked and NOWsignals stop worked. NOW THE DASHBOARD GOES OFF AND ON ALSO Hi Bernard:The FLASHER is located under the driver dash it ...

...turn signal are on the same bulb on these, correct? If so do the turn signals work? If they do than I would bet that the turn signal switch itself is the problem. The power for the brake lights is ...

...turn signal and flasher work to be able to trace my problem The flasher must be replaced by the full unit and best not to repair. there is no need of a diagram as the positive voltage from the signal ...

...are. Wipers work to My turn signals do not work but my hazards do. My wipers and everything else that is controlled with this handle works. Relay fuse problem?? sounds like flasher bad for turn ...

...turn signal fuse is blown, then the flasher, module, it should be located on the fuse block, driver side, I believe u have to remove the panel under the dash to expose it, it's rectangular and plugs ...

turn signals and hazard flashers don't work Hi , Replace the flasher unit. Regards John