2005 Chrysler Town & Country "replace fan motor controls" Questions

Ad

Question about Chrysler Town & Country

1 Answer

...replace the fan speed controller/resistor. The blower motor is behind the glove box. BE SURE TO REMOVE THE NEGATIVE SIDE OF THE BATTERY FIRST(AIR BAG EQUIPED!). There will be the controller in the ...

Ad

Question about Chrysler Town & Country

3 Answers

...shorts out causing full power to be sent to the fan at all times. If you are handy with a soldering iron you can buy this transistor online for about $5 and replace the one on the circuit

Ad

Question about Chrysler Town & Country

1 Answer

...motor before the resistor. For the resistor to burn out .Well it requires fan air flow to keep it cool and with the ignition off it must still be getting current to it to earth. I am suspecting a ...

Question about Chrysler Town & Country

1 Answer

...sys. If you shut off unit and fan still runs, I had the same problem. I needed to replace blower motor resister located behind glove box. 2 plugs and 2 screws to remove. bought off internet for

Question about Chrysler Town & Country

1 Answer

a/c fan only works on high need to replace a/c speed control switch Have you tested/replaced fan motor resistor yet? Most common problem when fan only runs on high, is the resistor.

Question about Chrysler Town & Country

1 Answer

...fan only works on high U WILL NEED TO REPLACE THE BLOWER MOTOR SPEED CONTROL RESISTOR, DO U HAVE AUTO AC CONTROL? HERE IS PART NUMBER FOR MANUAL AC WHICH IS THE MOST COMMON. STANDARD MOTOR PRODUCTS ...

Question about Chrysler Town & Country

1 Answer

...motor resistor which is located under/behind the dash generally in the same area as your controls for the fan. The resistor can be purchased from Advanced for about $23 and should take about 30-45 ...

Question about Chrysler Town & Country

3 Answers

...replace the fan relay, and then the fan motors if not fixed. Check the temp. controlled switch, it will be either on the thermostat housing or on the rad. It looks like a large nut with 1 or 2 wires ...

...low or high. All other settings are the same as low replace the resister module for the fan,this is what controls the speeds,and most of the time the blower motor is what causes the module to go

...can't seem to get to it. Any advise would be great. i dont know,,,,,,,,,,,,,but ,,,,,,,,,,kicking it,most likely need to replace the blower resister also ,they are very fadgle,,,and control fan ...

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

2,046 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...