2004 Dodge Ram 1500 "timing marks line" Questions

...timing chain and dis.. And answer to point me in the right way would help Number one piston all the way up. Your crank pully should line up "zero" or TDC with the line on the pulley. The rotor should ...

... locate v8 on crankshaft damper(147 degrees ATDC). rotate engine until v8 lines up with TDC mark on timing cover. install rocker arm and pivot assemblies and torque to 21 ft. lbs. wait 5 minutes ...

whats the easiest way to get to my rodor button? Your rotorbutton is under the distributor cap and it needs to come off. You should see 2 screws on the side of the cap, use a screwdriver andpush down ...

heater blows good and only gets luke warm will not get hot . I changed the radiator, thermostat,water pump. both of my flow and return hoses get hot so it's not my heater core. I burped the radiator ...

coolant leaks I have a 98 dodge 1500 ext/cad/2wd.My coolant leaks out at the bottom by the battery.I checked my radiator it was fine,not hot or steaming.Now my coolant jug was empty so I filled ...

dodge ram 1500 running rich already changed plugs and sometimes a misfire Hi. There are many causes for this occurrence. I will list the most common culprits below:1. Vac line disruptions(separated, ...

...MARKS TO TIMING MARKES AFTER TURNING ENGINE OVER BY HAND TIMING MARKS LINE UP BUT BELT MARKS DONT dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt ...

...Timing marks don't line up! Can't get the passenger side cam marks to come into line when all the other marks line up including the timing belt marks they line up. It's just the passenger side cam ...

...timing marks line up. There are three timing chains on these engines. On my Sorento even after the timing marks have been set and the engine is rotated by hand, after numerous revolutions the timing ...

timing marks on the 1.7 ltr. sohc on my 2004 honda civic ex, has timing belt there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is above the