1991 Dodge Caravan "19 mm inches" Questions

...a cv axle on a '91 dodge caravan YOU WILL NEED A 12 MM. SOKET 17 M.M. 15MM 19 MM. 10 MM. AND FOR THE BIG NUT IN THE CENTER YOU WILL NEED 1 INCH 1/4 SOKET 1/2 INCH ZISE PLUS A BIG RACHED TO GET IT ...

...19 mm), but also carry the two studs you need. Remove the wheel assembly and with the two broken studs, take a hammer and on the backside, you'll see a hole to line up the back of the stud, and ...

...mm wrench - Phillips S2 - drill with attachment for screwdrivers ( I have tendonitis) - gooseneck extension (plastic / flexible) Here are the instructions from the Haynes book with my comments and ...

how many inches in 19 mm One mm is 0.0393701 inches. 19 mm is 3/4 of an inch. There is a conversion table you can use: http://www.metric-conversions.org/length/millimeters-to-inches-table.htm

...19 mm socket (1/2 inch) Timing belt Balancer belt Bottle of Liquid Paper Disconnect the negative battery terminal. Using a ½-inch-drive ratchet and the 19 mm socket, turn the center bolt on the ...

...the line doesn't loosen. but the fitting does. The fitting( which you have to hold in place) is 3/4 inch or 19 mm. Could be bigger. You didn't give year make and model. Or the transmission

what tools are needed to remove the rear bumper 2003 Ford Ranger pickup you will need a half inch ratchet and 19 mm and a 21 mm socket

...engine sequence to follow torque specification 03 Hyundai santa fe, 2.7L engine M6x38 mm bolts, 96--106 inch lbs. M8x38 mm bolts, 15-19 ft lbs. no sequence given in the specifications guide

...mm (19/32-inch) closed end wrench for 5.8L and 7.3L engines on the tensioner pulley bolt and lift the tensioner arm away from the belt. Remove belt. Release tensioner arm slowly. Do not allow arm to ...

...19 mm hex socket to break the mounting bolt loose. may require a large handle 1/2 inch socket wrench as the mounting torque is about 100 foot pounds. reverse the pipe wrench when tighting the ...