1987 Chevrolet Blazer "wheel drive" Questions

...WHEEL DRIVE PUSH BUTTON FOR 1993 4X4 BLAZER....IT HAS HIGH AND LOW DRIVES....HOW DO U PUT IN IT 4 WHEEL DRIVE AND HOW DO U GET IT BACKK INTO 2 WHEEL DRIVE STEP BY STEP PLEASE Your blazer is equipped ...

...wheel drive selector on my Chevy S10 4 wheel drive pickup All 3 lights are blinking on the 4 wheel drive selector and I'm not sure if it is in 4 wheel drive or 2 wheel drive you will know if you are ...

...wheel drive. The drive engauges and disengauges fine. When I jacked the wheel off the ground the axle turns with the wheel even in two wheel drive. humming noise come from wheel bearing normally when ...

wheel drive is stuck on i noticed my 4 wheel drive was on when i headed in to work, i pushed the 2 wheel button, to disengage the 4 wheel, but it poped right back into 4 wheel. how do it get the truck

...wheel drive or disengaging Yesterday the 4 wheel drive worked but I put it into 2 wheel drive when needed then back to 4 wheel drive. Worked fine. Then I backed out of a drive way and couldn't get it ...

...wheel drive. I changed my front wheel bearing the four wheel drive went out. The four wheel drive lights on dash blink then go out. Service 4 wheel drive comes on. Is there a servo that needs ...

...wheel drive problems. The problem begins when I start the blazer. Sometimes when it starts, the indicator lights on the shift buttons work fine and 4-wheel drive will shift without a problem. Lately, ...

...wheel drive so i thought nothing of it well yesterday the truck ran fine but when i went to drive last night its stuck in 4 lo i tried to push the 2 hi button didnt work so i tried the auto 4 wheel ...

...wheel drive. The indicator lights function correctly. The transfer case is engaging, but the wheels do not drive. Also there is a significant amount of 'drag' on the front wheels when in two wheel ...

...wheel drive the 4 wheel low light will flash and when slow truck down to a stop it will shift into 4 wheel low and will not go back to 2 wheel high Sometimes the solenoids will stick on the axle ...