1993 Chevrolet C2500 "turn signal" Questions

...turn signal I was told by the former owner that he had a trailor hooked up. He thought that he might not have hooked the wires back tight enough. I don't know which color wires to look for when i am ...

...turn signal does not work. Front turn signal is blinking fast. Have replaced bulbs and the lamp bases in taillight section. Right side is working fine. Could it be the flasher? no it can not be the ...

...turn signal is used both signal lights are blinking.when i step on the brake pedal with the igniton off the buzzer sounds. Check for bad grounds, back by the tail lights , the grounds should br going ...

... The front lights will blink fast when the rear lights do not work. There could also be a problem with the turn signal switch. Check with the wiring schematics to see which wires to check for power. ...

95 chev truck blows fuses Blows turn signal fuse when key is turned on. Have replaced turn switch and ignition switch. Your truck has a trailer hitch? Right! Check out the wiring! Frankster016

...turn signal flasher should be near each other, and are interchangeable. If it clicks fast, a bulb or a bad socket is usually the cause. These trucks have a lot of problems with the tail light circuit ...

...when the turn indicator does not blink it is a burnt out bulb. be that as it may the turn signal relay is under the dash on the drivers side... either located in the fuse box or as a standalone

Are the turn signals on the front supposed to flash opposed or in unison? The side bulb and the front bulb on a given corner should alternate.

no rear break lights Why would 1995 Chevy Cheyenne 2500 cab brake lights turn signals running lights work but rear brake lights nor trailer lights will not? have you checked all of your fuses often ...

i don't have any tail lights on my 1994 GMC 2500 2wheel drive pickup. I have brake lights and turn signals but no tail lights and no license plate lights. check fuses i could be somthing like a ground