how to replace fuel pump on 1986 corvette remove fuel door, rubber boot, take out bolts from sender,pull up sender from tank,replace pump and screen on the end.replace pretty easy on vette.
location of fuel pump relay, 1984 corvette can't find location of fuel pump relay Here's a link peter. 1986 Corvette Fuel Pump Relay replace
...replace the fuel pump relay and see if it will start then. Also, make sure that the battery terminals are clean and secure; also on the starter, and the ground (at chassi - or block, wherever the ...
fuel pressure was low and replaced the pump I now have 40 plus psi and now no spark. What should i do check the crank sensor with a meter for an induction current then if a current change the ignition
...fuel lines. On an '86 I'd replace them unless they are stainless in which case I'd just blow them out with compressed air. Pinched fuel line, look for crushed areas or kinks, clogged fuel filter, ...
...replace fuel pump, fuel filter, tps, egr valve, temp sensor, o2 sensor, have you tried checking the map sensor this can sometimes cause the engine to run oddly. also check for good spark check wires ...
...replace pump remove fuel door assembly and pump is right there no droping the tank all from up top remove hoses and all bolts and pump pulls right out mine still worked but i replaced anyway and when ...
...fuel pump, new wires, new ignition module in distrubitor I am out of ideas i have a 1986 chevy corvette, when you fist start the motor it idel fine, when it wormes up, it ideling rough and RPM jumps ...
how to replace a fuel pump on a 1986 chevy corvette fuel pump is in fuel tank remove tand and take pump out of top of tank were hoses and fuelguage sensor hooks up
...fuel and test pump. Is there any way to jump across a relay or fuse to accomplish this I WOULD JUST REPLACE THE PUMP AND GET A WET DRY VACC TO **** OUT THE OLD GAS.THE PUMP COMES OUT THE TOP OF THE ...
232 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions