1992 Chevrolet S-10 Blazer "abs system" Questions

abs light means the system has a problem and it is disabled until you fix it.  The regular brakes still work as you know.Someone needs to scan the computer for ABS trouble codes and go from there

abs system without a problem can i disconnect my abs system? You can. Of course the ABS portion of the brakes will not work, but the brakes will manually function just fine. You will just have to rely

...wrong with the abs system? Sounds more like a caliper problem then an abs problem. ABS systems dont lock up your wheels it prevents them from locking up when you apply to much pressure on the

abs light is on a problem with the ABS system. you can plus a OBD2 code scanner to check where is the problem in the abs system.

ABS system and the control module has disabled the ABS, at this time you just have non ABS brakes, to find out what the fault mat be you will need a brake shop to test the ABS control module for fault

...NH and it would fail the saftey inspection if either of thoughs lights were on during the inspection.See if this helps your problem but you most likely have a wheel sensor going bad in the ABS

ABS ( anti lock brake system ) either you have a fault in the system or it registered that it lost traction whilst braking, maybe in the ice ? If there is not a fault with the system, it should go off

...coming on in the dash. Get a code scanner that also reads the abs module. You could have a bad wheel sensor, which is tied to your TCS and your ABS system. Either that, or you ABS module could be

...abs system on a 2000 chevy blazer 4wd, how do i do this and can I You can disconnect it by just pulling the fuse out for the ABS sytem. The fuse will be located at the end of the dash on the drivers ...