1990 Chevrolet S-10 Blazer "injectors" Questions

...32?°C (50-90?°F) Go to Step 3 Go to Step 4 3 Disconnect the multi-way harness connector of the fuel injectors. Measure the resistance of each fuel injector between the ignition 1 circuit and the fuel ...

i have a 2003 s10 blazer 4.3v6 vortec. ok i keep getting hydrolock my #6 keeps feeling up with gas. i changed the sensors bought one new injector and new regulator and still the same.New pcm? # 6 ...

...rail but wont start still wont start unless I pore gas in tb If you have checked the fuse for the injectors and when you turn the key it sounds like it wants to start then you could try running

how many fuel injectors in a 1996 Blazer It all depends if its a 4cyl(has 4 injectors), 6 cyl(has 6 injectors) or a 8 cyl(has 8 injectors) your blazer has a 4.3 engine which is a V6 engine you should ...

How do you check injectors on a 95 blazer 4.3 engine? the injectors are under the upper intake plenum. they are not indavidual part but a plastic injector assembly the individual tubes to each ...

...intake manifold. There maybe a clip holding on the injector. Spraying some WD-40 on the ends of the injectors to aid removal, also when installing, spray some on the O-rings, will help in installing ...

the injectors not working there is i fuse for the injectors 1 wire feeds all 6 it is 12 volts there are 6 wires leave the ecm and feed the pulsation of that injector when its needed . if injectors ...

...It starts when you spray injector fluid into throttel body. I was thinking it could have clogged injectors but im not to sure. please let me know what you think. Thank you. use noid lights to see ...

...60psi when tested won't start dump gas in intake starts and shuts off ?????? Sounds like your injectors aren't opening if it holds that pressure. Get a "noid light" at parts store that fits ...

gas not going through injector vortec 4.3 v-6 getting gas to the injector but wont go through it the injector needs to be cleaned with professional fuel injector cleaner!