2003 Ford Expedition "remove bottom bolt" Questions

Ad

...of the starter and you could fit your hand up there to feel it and place the socket. The 3rd bolt is between the bottom and top bolts. Remove the 3 bolts and the starter falls right out. All the

Ad

Question about Ford Expedition

2 Answers

...remove the seat. There will also be electrical connectors (probably with a "keeper" mechanism). Disconnect it carefully, and don't forget to reconnect when you put the seats back in. Most seats are ...

Ad

...remove the front seats of my Expedition. four bolts and they are out and diconect the wires some of them un bolt from the bottom but most have little plastic covers on the rail covering up the bolts ...

remove starter where is the third bolt that holds starter in place? It comes in from the opposite direction on the bell housing.You got to use a small hand wrench box style and once you break it loose

Question about Ford Expedition

1 Answer

...remove the two mounting bolts at top of the radiator where it attaches. Those are the only bolts holding it in. it rest inside grooves at bottom so you just pull up the radiator and you have it ...

Question about Ford Expedition

1 Answer

...remove the front caliper, you must pop pop off the anti rattle spring, pay close attention as to how it attaches so you can reinstall it, then pop off the hex bolt covers on the rear of the caliper, ...

...remove the fender you will find bolts under the hood along the top of the finder edge. there is one under the cow as well right close to where the fender connects to the suv by front door. you will ...

center of the headlight to loosen and then 2 on top to remove and one on the outer side on the bottom to rmeove. Pull the headlight out and unplug it. Then remove the boots and replace the blown bulbs

Question about Ford Expedition

1 Answer

...bottom of the assembly. Remove it, too. Slide the entire assembly forward. It's tricky because the edges get caught on the surrounding structures, but it will slide out. Remove the round rubber ...

Question about Ford Expedition

1 Answer

...bottom, in that order. Remove the screw that is behind this. 2.Remove the switch panel by placing a flat head driver in the crevice facing towards the rear of the vehicle and pry upwards. Once you ...

Not finding what you are looking for?
2003 Ford Expedition Logo

2,768 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

1997 Ford Expedition
1997 Ford Expedition

1,048 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...